D-Link DCS-5020L manual Zero Configuration Setup, Camera

ENGLISH

Zero Configuration Setup

If you have a D-Link Cloud Router with an Internet connection, you can take advantage of Zero Configuration. This feature automatically configures your camera’s settings for you and adds it to your mydlink account automatically. If you do not have a D-Link Cloud router, refer to the next page to install and configure your camera.

1	Connect the Ethernet cable and power adapter to the
	camera.

2	Connect the other end of the Ethernet cable to your
	D-LinkCloudRouterandconnectthecamera’s power

adapter to a power outlet.

From any computer, open a web browser,

3 go to http://www.mydlink.com and log into your account.

Click on the device name when the notice appears to add the camera to your account.

DCS-5020L

If you wish to connect your camera to your router wirelessly, you can simply disconnect the Ethernet cable and move the camera to its intended location after you have added the camera to your account (step 3).

4