D-Link DCS-2102 manual Setup Wireless DCS-2121 only

Page 28

SETUP > Wireless (DCS-2121 only)

To set up your IP camera's wireless network interface settings, enable Wireless Settings in this window first. Then continue the further configuration next.

Site survey: Clicking this button will scan for available wireless networks. After scanning, you can use the dropdown box to select an available wireless network, and related information(SSID, Wireless Mode, Channel, Authentication, Encryption) will be automatically filled in for you.

SSID: Enter the SSID of the wireless access point you wish to use.

Channel: If you are using Ad Hoc mode, select the channel of the wireless network you wish to connect to, or select Auto.

Wireless Mode: Use the dropdown box to select the mode of the wireless network you wish to connect to. Infrastructure is normally used to connect to an access point or router. Ad-Hoc is usually used to connect directly to another computer.

Authentication: Select the authentication you use on your wireless network - Open, Shared(WEP), WPA-PSK, or WPA-PSK2.

Encryption: If you use WPA-PSK or WPA-PSK2 authentication, you will need to specify whether your wireless network uses TKIP or AES encryption. If you use Open or Shared authentication, this setting will be automatically set for you.

Key: If you use WEP, WPA-PSK, or WPA-PSK2 authentication, enter the Key(also known as password) used for your wireless network.

After making any changes, click the Save Settings button to save your changes, or click the

Don’t Save Settings button to discard your changes.

25

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Page Table of Contents Page Package Contents Minimum System Requirements Introduction Features and Benefits For the DCS-2121 Megapixel Wireless Internet CameraHardware Overview FrontBottom Hardware Installation Connect the camera baseConnect the Ethernet Cable Autorun Installation Software Installation Click Yes Click Next Click Finish Page Click Install Click Close Page Admin ID admin WizardDCS-2121 only Page Page Adjusting the Camera Focus Setting up a Wireless Connection with WPS DCS-2121 only Using the Configuration Menu Live Video Live Video CameraSetup Setup WizardSetup Network Setup Setup Wireless DCS-2121 only Setup Dynamic DNS Setup Image Setup Setup Audio and Video Page Setup Motion Detection Setup Time and Date Record to Setup RecordingRecording Options Scheduling Trigger Event Setup SnapshotSend to Setup Digital Output Maintenance Maintenance Device ManagementMaintenance Backup and Restore Maintenance Firmware Upgrade Status Status Device InfoStatus Log Help Installing the DCS-2102/2121 Behind a Router Identify Your Camera on the NetworkAssign a Local IP Address and Port for Your Camera Open the Http Port Router Setup Open Virtual Server Ports to Enable Remote Image Viewing Viewing Your Camera Over the Internet Viewing Your Camera Over the Internet Behind a RouterFrequently Asked Questions Why does the Power LED not light up? Why can’t I access the Internet Camera from a web browser?Video image is blurry, how can I correct it? Why are no images available through the Web browser? How to Ping Your IP Address Start a DOS window Start Program Accessories Command PromptPage Time Zone Table Do Digital Output DI/DO Input specificationsDI Digital Input Technical Specifications Reset Button Dimension WxDxHWeight Max Power ConsumptionFeatures ResolutionAlgorithm Supported Low LuxPower DeviceUtility Humidity

DCS-2102, DCS-2121 specifications

D-Link DCS-2121 and DCS-2102 are cutting-edge network cameras designed for unparalleled surveillance in homes and businesses. Both models integrate advanced technologies that deliver high-quality video and robust security features, making them popular choices among users seeking reliable monitoring solutions.

The DCS-2121 is equipped with a 1.3-megapixel sensor that provides exceptional image clarity and detail, which is crucial for effective surveillance. It supports video resolution of up to 1280x1024 pixels, enabling users to capture fine details even in large spaces. The camera also boasts a wide dynamic range, enhancing its ability to capture clear images in challenging lighting conditions, such as bright sunlight or complete darkness.

On the other hand, the DCS-2102 features a 1.0-megapixel sensor, delivering impressive video quality with resolutions up to 720p. While it offers slightly lower image quality compared to its counterpart, it still provides sufficient clarity for various monitoring needs. Both cameras support H.264 compression technology, which significantly reduces file sizes while maintaining high video quality, making it easier to manage and store recorded footage.

One of the standout features of both models is night vision capability. They are equipped with infrared LEDs, allowing for clear visibility in complete darkness, which is essential for 24/7 surveillance. This is complemented by automatic IR cut filters that switch between day and night modes seamlessly, ensuring optimal image quality regardless of the time.

Connectivity is another crucial aspect, as both cameras come with Ethernet ports for wired connections and support Wi-Fi for wireless installation. This flexibility enables users to set up the cameras according to their specific needs and environments. Furthermore, they offer remote access capabilities, allowing users to monitor live feeds via web browsers or mobile applications from anywhere in the world.

To enhance security, the DCS-2121 and DCS-2102 benefit from motion detection technology, which triggers alerts and recording events when movement is detected. This feature helps conserve storage space and ensures that critical incidents are always documented.

In summary, the D-Link DCS-2121 and DCS-2102 network cameras present a compelling combination of image quality, versatility, and advanced surveillance technologies. Whether for home security or business monitoring, these models deliver reliable performance and peace of mind, making them valuable assets in any security system.
Top Page Image Contents