D-Link DCS-2102, DCS-2121 manual Setup Motion Detection

Page 33

SETUP > Motion Detection

This option allows you to set up Motion Detection on your IP camera. In order to use motion detection you must first check the Enable Video Motion checkbox. You can then click on the video window and draw motion detection zones by clicking and dragging your mouse. Red areas indicate areas that will be monitored for motion.

Sensitivity: This setting adjusts how sensitive the camera will be to motion, where 100% will be the most sensitive setting and 0% will be the least sensitive setting.

Drawing Mode: This will allow you to draw motion detection zones when clicking and dragging, or erase motion detection zones when clicking and dragging depending on which option you have selected.

Clear: Clicking this button will clear all motion detection zones.

After making any changes, click the Save Settings button to save your changes, or click the Don’t Save Settings button to discard your changes.

Note: If the camera is set to SXGA mode in Audio and Video, Motion Detection is disabled.

30

Image 33
Contents Page Table of Contents Page Package Contents Minimum System Requirements Introduction For the DCS-2121 Megapixel Wireless Internet Camera Features and BenefitsFront Hardware OverviewBottom Connect the camera base Hardware InstallationConnect the Ethernet Cable Autorun Installation Software Installation Click Yes Click Next Click Finish Page Click Install Click Close Page Wizard Admin ID adminDCS-2121 only Page Page Adjusting the Camera Focus Setting up a Wireless Connection with WPS DCS-2121 only Using the Configuration Menu Live Video Camera Live VideoSetup Wizard SetupSetup Network Setup Setup Wireless DCS-2121 only Setup Dynamic DNS Setup Image Setup Setup Audio and Video Page Setup Motion Detection Setup Time and Date Setup Recording Record toRecording Options Scheduling Setup Snapshot Trigger EventSend to Setup Digital Output Maintenance Device Management MaintenanceMaintenance Backup and Restore Maintenance Firmware Upgrade Status Device Info StatusStatus Log Help Identify Your Camera on the Network Installing the DCS-2102/2121 Behind a RouterAssign a Local IP Address and Port for Your Camera Open the Http Port Router Setup Open Virtual Server Ports to Enable Remote Image Viewing Viewing Your Camera Over the Internet Behind a Router Viewing Your Camera Over the InternetFrequently Asked Questions Why can’t I access the Internet Camera from a web browser? Why does the Power LED not light up?Video image is blurry, how can I correct it? Why are no images available through the Web browser? Start a DOS window Start Program Accessories Command Prompt How to Ping Your IP AddressPage Time Zone Table DI/DO Input specifications Do Digital OutputDI Digital Input Technical Specifications Dimension WxDxH Reset ButtonWeight Max Power ConsumptionResolution FeaturesAlgorithm Supported Low LuxDevice PowerUtility Humidity

DCS-2102, DCS-2121 specifications

D-Link DCS-2121 and DCS-2102 are cutting-edge network cameras designed for unparalleled surveillance in homes and businesses. Both models integrate advanced technologies that deliver high-quality video and robust security features, making them popular choices among users seeking reliable monitoring solutions.

The DCS-2121 is equipped with a 1.3-megapixel sensor that provides exceptional image clarity and detail, which is crucial for effective surveillance. It supports video resolution of up to 1280x1024 pixels, enabling users to capture fine details even in large spaces. The camera also boasts a wide dynamic range, enhancing its ability to capture clear images in challenging lighting conditions, such as bright sunlight or complete darkness.

On the other hand, the DCS-2102 features a 1.0-megapixel sensor, delivering impressive video quality with resolutions up to 720p. While it offers slightly lower image quality compared to its counterpart, it still provides sufficient clarity for various monitoring needs. Both cameras support H.264 compression technology, which significantly reduces file sizes while maintaining high video quality, making it easier to manage and store recorded footage.

One of the standout features of both models is night vision capability. They are equipped with infrared LEDs, allowing for clear visibility in complete darkness, which is essential for 24/7 surveillance. This is complemented by automatic IR cut filters that switch between day and night modes seamlessly, ensuring optimal image quality regardless of the time.

Connectivity is another crucial aspect, as both cameras come with Ethernet ports for wired connections and support Wi-Fi for wireless installation. This flexibility enables users to set up the cameras according to their specific needs and environments. Furthermore, they offer remote access capabilities, allowing users to monitor live feeds via web browsers or mobile applications from anywhere in the world.

To enhance security, the DCS-2121 and DCS-2102 benefit from motion detection technology, which triggers alerts and recording events when movement is detected. This feature helps conserve storage space and ensures that critical incidents are always documented.

In summary, the D-Link DCS-2121 and DCS-2102 network cameras present a compelling combination of image quality, versatility, and advanced surveillance technologies. Whether for home security or business monitoring, these models deliver reliable performance and peace of mind, making them valuable assets in any security system.