Cisco Systems 4300E, 4500E manual Action Explanation

Page 14

Chapter 2 Getting Started

Installing the IP Camera

Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074

Warning The power supply must be placed indoors. Statement 331

Note If you use the IP camera outdoors, place the camera and the power supply in a suitable NEMA enclosure.

Warning This product must be connected to a power-over-ethernet (PoE) IEEE 802.3af compliant power source or an IEC60950 compliant limited power source. Statement 353

Caution Inline power circuits provide current through the communication cable. Use the Cisco provided cable or a minimum 24AWG communication cable.

Note The power adapter that you use with the IP camera must provide power that is within +/–10% of the required power.

Note The equipment is to be connected to a Listed class 2, limited power source.

To install the IP camera, follow the steps in Table 2-1. For illustrations of the connectors and ports that the steps refer to, see the “IP Camera Physical Details” section on page 1-3.

.

 

 

Table 2-1

Installing the IP Camera

 

 

 

 

 

Action

Explanation

 

 

 

Step 1

Attach a lens to the lens opening on the IP camera.

• If you are using a CS mount lens, screw the lens into

 

 

the lens opening. The IP camera accepts CS-mount

 

 

lenses with a lens protrusion of up to 5 mm.

 

 

• If you are using a C mount lens, screw the C mount

 

 

lens adapter that is supplied with the IP camera into

 

 

the lens opening, then screw the lens into the adapter.

 

 

Ensure that the lens is clean because any dirt may degrade

 

 

the quality of video images.

 

 

Note Save the lens opening dust cap and replace the dust

 

 

cap if you remove the lens.

 

 

 

Step 2

If you are using a DC auto iris lens, connect its cable to

For best performance, Cisco recommends that you use a

 

the DC auto iris lens connector on the IP camera.

DC auto iris lens.

 

 

 

Cisco Video Surveillance 4300E and 4500E High-Definition IP Camera User Guide

2-2

OL-25230-02

 

 

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Americas Headquarters Text Part Number OL-25230-02Copyright 2009-2011 Cisco Systems, Inc. All rights reserved N T E N T S Log Windows Overview OrganizationOL-25230-02 IP Camera Features OverviewOverview IP Camera Features Adjusting Back Focus on the IP Camera section on IP Camera Physical DetailsRear of IP Camera Described in the Resetting the IP Camera section on Side of IP CameraDC Auto Iris Lens Connector Pinouts Package ContentsInstalling the IP Camera Getting StartedAction Explanation Action Explanation OL-25230-02 Before you Begin Performing the Initial Setup of the IP CameraProcedure Accessing the IP Camera Protocol//ipaddressHttp//203.70.212.52 Https//192.168.0.100Https//203.70.212.521024 Http//203.70.212.521024Link Description Understanding the IP Camera User InterfaceIP Camera Window Links General Information IP Camera WindowsField Description Network StatusAdjusting Back Focus on the IP Camera Channel 1 and ChannelReset Type Procedure Remarks Powering the IP Camera On or OffResetting the IP Camera Managing the Local StorageFormatting the USB Flash Drive Click the Video Surveillance IP Camera Utility linkClick Format USB Downloading Encrypted Video Files from the USB Flash DriveDeleting Encrypted Video Files from the USB Flash Drive What to Do NextDecrypting Encrypted Video Files Configuring and Managing the IP Camera Accessing Navigating the Configuration WindowsFeature Setup Windows SnmpStreaming Streaming Settings WindowResolution Primary fps Secondary fps Current Channel Area Streaming Setup AreaOption Description Video Area Audio Area Camera Settings WindowAnalog Video Area Described in , Viewing Live Video Video Adjustments AreaMicrophone Area Day Night Filter AreaText Overlay Area Video Overlay Settings WindowVideo Overlay Output Ports IO Ports Settings WindowInput Ports Area Pan/Tilt Area Pan Tilt Settings WindowRS-232 Settings Event Notification Window Event Triggering Area Set All button Event Scheduling AreaUndo Clear All buttonEmail Notification Area FTP Notification Area Patrol Sequence Window Patrol Sequence Area Analytics Windows Network Setup WindowsBasic Settings Window Basic Device Operations Area Basic Settings AreaIP Addressing Window Time Settings Window IP Addressing AreaLocal Time Area Set Time Mode AreaYou click Save Settings Clone PC Time buttonCisco Discovery Protocol CDP Area Discovery Settings WindowNTP Server Settings Area Show Neighbors buttonSnmp v3 Area Snmp Settings WindowSnmp v2c Area 8000000901IPv4addresshex 802.1x Settings Window EAP-FAST Configuration Options IP Filter Settings WindowEAP-PEAP Configuration Options IP Filter Area QoS Settings WindowClass of Service CoS Area Filter Entries AreaAccount Initialization Window Administration WindowsDifferentiated Services DiffServ Area SSH Administrator Accounts AreaAccess Protocols Area User Settings Window User List AreaDelete button Maintenance Settings WindowChange button Reboot Area Reboot button Factory Default Area Restore buttonReset button Device Configuration AreaDevice Information Area Firmware Settings WindowAddressing Window section on Device Processes Window Firmware Maintenance AreaUpgrade button Details buttonLog Windows Password Complexity WindowLog Setup Settings Window, Local Log Window, Syslog Settings Area Log Setup Settings WindowLocal Log Settings Area Option Description Log messages, see -25 on Local Log WindowLog List Area Explanation Severity AuthenticationfailedAuthorizationfailed CodeclostConfiguploadfailed ConfigsavefailedConfigsaved ConfiguploadedOutputonereset InputtworesetLogin OutputtworesetServercontacted TimedstswitchTimeregswitch ServerlostControl Description Video controlsStreaming Settings Window section on Video image controlsSave Snapshot button Image tools Hotspot Zoom buttonHotspot Pan/Tilt Mirror buttonFull Screen button Audio controlsAdd Preset Position Presets controlsSet Current Preset as Preset buttonPan/tilt speed controls Motion detectionMotion detection controls Enable Motion Detection check box Save Settings button Full Screen checkTroubleshooting Troubleshooting Numerics IN-2 Http HttpsSee also video LEDIN-5 IN-6 IN-7 IN-8
Related manuals
Manual 86 pages 60.48 Kb

4500E, 4300E specifications

The Cisco Systems 4300E Series is an advanced integrated service router designed to deliver high-performance, scalable, and secure networking solutions for enterprises. This versatile platform caters to a wide range of applications while ensuring reliability and flexibility in dynamic environments.

One of the standout features of the Cisco 4300E is its modular architecture, which allows organizations to tailor the router to their specific needs by adding or changing modules. This modularity is crucial for enterprises that require agility to adapt to evolving network demands. The router supports various network interface modules (NIMs), service modules (SMs), and high-speed WAN interface cards (HWICs), enabling seamless integration of various interfaces and features.

The Cisco 4300E is designed with performance in mind, capable of delivering high throughput and low latency, which is essential for applications such as voice, video, and data traffic. It supports robust performance with the capability of handling up to 2 Gbps of throughput, making it suitable for mid-sized to large enterprise branch offices.

Another key technology associated with the 4300E is Cisco’s Unified Communications and Collaboration suite. This integration facilitates voice, video, and messaging services across the network, ensuring efficient communication within organizations. Security features include advanced threat protection through Cisco’s integrated security services, such as firewall capabilities, VPN support, and intrusion prevention, ensuring that sensitive data remains secure.

The Cisco 4300E also supports Cisco’s DNA (Digital Network Architecture) capabilities, allowing for automation, analytics, and enhanced network visibility. This integration empowers network administrators to manage their infrastructure proactively, ensuring optimal performance and quick resolution of issues.

Additionally, the router is equipped with enhanced Quality of Service (QoS) capabilities, enabling prioritization of critical applications and traffic types. This feature is vital for maintaining high performance across diverse application requirements.

In conclusion, the Cisco 4300E Series routers stand out for their modular architecture, high performance, integrated security, and support for advanced networking technologies. These characteristics make them ideal for enterprises seeking a robust, flexible, and secure solution to meet their networking needs in an ever-evolving digital landscape. With the ability to seamlessly integrate various services and applications, the 4300E is a reliable choice for any organization looking to future-proof its network infrastructure.
Top Page Image Contents