Curtis WF-037a user manual Set the Time out, Set TV output system

Page 17

3.3Set the Time out:

Power on the unit, press the [MENU] button to call out the menu.

Press the [UP] or [DN] button to move the highlight to TIME OUT.

Press [CONFIRM] to into the setting.

Press [UP] or [DN] button to set the time out time on minutes.

Press [CONFIRM] again to confirm the setting.

Then press [MENU] again to exit the setting.

3.4Set TV output system.

Power on the unit, press the [MENU] button to call out the menu.

Press the [UP] or [DN] button to move the highlight to TV OUT.

Press [CONFIRM] to enter the setting.

Image 17
Contents Model WF-037a Scouting CameraOpen view image with major parts indication Bottom view Side view with major parts indication Page Package contents InstallationGetting to know your Scouting Camera PreparationSoftware installation Page Battery and SD memory card installation An image to shown how to locate the batteryAn image to show how to locate the SD card Memory Options Status Icons on TFT display Display, Controls and ProgrammingPage Page Change the display mode to Playback Controls Change the display mode to PreviewWake up the unit during PIR detection Settings on PreviewSet the Capturing mode Resolution Set the ResolutionsSet TV output system Set the Time outSet Date and Time Set to delete all image Settings on PlaybackSet to delete one image Mounting the Camera with the supplier strap Getting startedMounting suggestions Testing the camera coverage area Page Using the camera in PIR detection mode Page Viewing the image on a handheld LCD TV video monitor Viewing the imagesPage Page To use the external battery pack power Using the external powerSpecial care instructions MaintenanceStoring conditions Monitor resolution adjustment Troubleshooting and HintsSD memory card use System Requirements and Compatibility Camera spec and system compatibilityCamera Features and Specification Page Safety