Curtis WF-037a user manual Using the external power, To use the external battery pack power

Page 29

Plug the other end of USB cable into the camera. The camera will automatically power ON and display a USB icon on the LCD screen.

At the same time, your computer will recognize the camera as mass storage device and found under MY COMPUTER.

Clip to open this device and using the provided application program to view the image or edit the image.

Using the external power.

1.To use the external battery pack power.

Insert the battery pack plug into the DC 12V jack of the bottom of camera housing

Turn the camera power on.

¾Please make sure the voltage and polarity are

Image 29
Contents Model WF-037a Scouting CameraOpen view image with major parts indication Bottom view Side view with major parts indication Page Package contents InstallationGetting to know your Scouting Camera PreparationSoftware installation Page Battery and SD memory card installation An image to shown how to locate the batteryAn image to show how to locate the SD card Memory Options Status Icons on TFT display Display, Controls and ProgrammingPage Page Change the display mode to Playback Controls Change the display mode to PreviewWake up the unit during PIR detection Settings on PreviewSet the Capturing mode Resolution Set the ResolutionsSet TV output system Set the Time outSet Date and Time Set to delete all image Settings on PlaybackSet to delete one image Mounting the Camera with the supplier strap Getting startedMounting suggestions Testing the camera coverage area Page Using the camera in PIR detection mode Page Viewing the image on a handheld LCD TV video monitor Viewing the imagesPage Page To use the external battery pack power Using the external powerSpecial care instructions MaintenanceStoring conditions Monitor resolution adjustment Troubleshooting and HintsSD memory card use System Requirements and Compatibility Camera spec and system compatibilityCamera Features and Specification Page Safety