Vector VEC256 owner manual Battery REMOVAL/REPLACEMENT, Battery Disposal, Specifications

can be wiped clean with a cloth moistened with water and a drop of detergent. Battery Pack contacts can be wiped clean with a dry cloth.

9.BATTERY REMOVAL/REPLACEMENT

The battery in the battery pack should be replaced with a new one when the operating capacity is reduced to about one half or the ability to inflate one and one half average sized automobile tires. Make sure that the battery is fully charged before determining that the battery pack should be replaced. Contact Vector Technical Support and ask for part VEC194. This battery pack is also used with other Vector products that include portable infla- tors and spotlights. For more details, please contact our Sales or Technical Support Department at 1-866-584-5504.

10.BATTERY DISPOSAL

Contains a maintenance-free, sealed, non-spillable, lead acid battery, which must be disposed of properly. Most states require recycling-contact your local municipal authority for information.

Non-spillable sealed lead-acid battery, must be recycled or disposed of properly. Recycling is required -contact your local authority for information. DISPOSAL QUESTIONS FOR USA CALL toll-free 877-288-7722.

WARNINGS:

•Do not dispose of the battery pack in fire as this may result in an explo-

sion

•Before disposing of the battery pack, protect exposed terminals with

heavy-	duty electrical tape to prevent shorting (shorting can
result in injury or		fire). Failure to comply with local, state and
federal regulations can result		in fines, or imprisonment

11.SPECIFICATIONS

Battery	12 Volt 3 Amp Hour, Non-spillable Sealed Lead-Acid
Compressor	260 PSI Maximum

11