Chapter 4 Installing the ASA 5505
Ports and LEDs
To install a cable lock, perform the following steps:
Step 1 Follow the directions from the manufacturer for attaching the other end of the cable for securing the adaptive security appliance.
Step 2 Attach the cable lock to the lock slot on the back panel of the ASA 5505.
Ports and LEDs
This section describes the front and rear panels of the ASA 5505. This section includes the following topics:
•Front Panel Components, page
•Rear Panel Components, page
Front Panel Components
The LINK/ACT indicators on the front panel of the ASA 5505 are normally solid green when a link is established and flashing green when there is network activity. Each Ethernet interface (numbered 0 through 7) has two LEDs: one to indicate the operating speed and the other to indicate whether the physical link is established.
|
| ASA 5505 Getting Started Guide |
|
|
|
|
| ||
|
|
| ||
|
|
|