Section 3: Configuration
Configuration
Using the Configuration Interface
After completing the Camera Installation Wizard, you are ready to use your camera. The camera’s built-in Web configuration utility is designed to allow you to easily access and configure your DCS‑7513. At the end of the wizard, click Link, or enter the IP address of your camera into a web browser, such as Mozilla Firefox. To log in, use the User name admin and the password you created in the Installation Wizard. If you did not create a password, the default password is blank. After entering your password, click OK.
Step 1
Click the Link button on the Wizard.
The Setup Wizard will automatically open your web browser to the IP address of the camera.
Step 2
Enter your credentials to access the configuration interface.
2
D-Link DCS-7513 User Manual | 27 |