D-Link DCS-7513 user manual Add Recording

Page 55

Section 3: Configuration

Add Recording

Here you can configure and schedule the recording settings. After making any changes, click the Save Settings button to save your changes.

Recording entry name: The unique name of the entry.

Enable this recording: Select this to enable the recording function.

Priority: Set the priority for this entry. The entry with a higher priority value will be executed first.

Source: The source of the stream.

Recording schedule: Scheduling the recording entry.

Recording settings: Configuring the setting for the recording.

Destination: Select the folder where the recording file will be stored.

Total cycling recording size: Please input a HDD volume between 1MB and 2TB for recording space. The recording data will replace the oldest record when the total recording size exceeds this value. For example, if each recording file is 6MB, and the total cyclical recording size is 600MB, then the camera will record 100 files in the specified location (folder) and then will delete the oldest file and create new file for cyclical recording.

Please note that if the free HDD space is not enough, the recording will stop. Before you set up this option please make sure your HDD has enough space, and it is better to not save other files in the same folder as recording files.

D-Link DCS-7513 User Manual

55

Image 55
Contents Full HD WDR Day & Night Outdoor Network Camera Manual Revisions Table of Contents Product Overview Package ContentsSystem Requirements IntroductionIris FeaturesFront Hardware OverviewSides Cable Harness Internal Installing an SD Card Assembly and InstallationAssembly and Installation Mounting the Camera Attaching the Camera to the Wire-in Bracket Step Allow the quick release rod to return Orienting the Camera Deploying the Camera Step General Connection Using 12 V DC Power Adapter Camera Installation WizardGeneral Connection Using 24 V AC Power Wiring Connection Using Power over Ethernet Software Installation Click Next to continue Step ViewCam Setup Wizard Click Finish to complete the installation Using the Configuration Interface ConfigurationControl Pad Live VideoRecord a Video Clip Setup Wizard SetupInternet Connection Setup Wizard Enter a name for your camera and click Next to continue Configuration Motion Detection Setup Wizard Configuration Network Setup Configuration Configuration Dynamic DNS Image Setup Configuration Audio and Video Configuration Focus Control Lens ControlPreset Configuration Motion Detection Time and Date MediaServer Event SetupConfiguration Add Server Add Media SNAPSHOTS20080104100341 Add Event Add Recording Configuration SD Card Digital Input/Output AdvancedICR and IR Https For example Access ListDevice Management MaintenanceSystem Firmware Upgrade Device Info StatusLogs Help DI/DO Specifications Technical Specifications System Dimensions