Samsung SID-50P instruction manual Features, Precautions, Getting to Know Your Camera

SALES NETWORK

• SAMSUNG TECHWIN CO., LTD.	• TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD.
145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si,	7 Pingchang Rd, Nankai Dist. Tianjin 300190, P.R China
Gyeonggi-do 462-703, Korea	TEL : +86-22-2761-4724(33821) FAX : +86-22-2761-6514
TEL : +82-31-740-8137~8141 FAX : +82-31-740-8145
• SAMSUNG OPTO-ELECTRONICS UK, LTD.
Samsung House, 1000 Hillswood Drive, Hillswood
Business Park Chertsey, Surrey KT16 OPS
TEL : +44-1932-45-5308 FAX : +44-1932-45-5325
www.samsungtechwin.com	P/No. : Z6806-0715-01A
www.samsungcctv.com	VAN 06. 03

HIGH RESOLUTION MINI DOME CAMERA

INSTRUCTION MANUAL

SID-50

About this manual

Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

INFORMATION-This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will required to correct the interference at his own expense.

WARNING -Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

WARNING - To prevent electric shock and risk of fire hazards:

Do NOT use other than specified power source.

Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and should conform to all local codes.

MINI DOME CAMERA 2 USER’S MANUAL

Thank you for purchasing a SAMSUNG CCD CAMERA.

Before operating the camera, confirm the camera model and proper input power voltage. In order that you can understand this manual thoroughly, we'll introduce our model description.

SID-50 SERIES
• NTSC models	• PAL models
SID-50N	SID-50P
Model Description
• SID-50X	• SIGNAL SYSTEM
	N	NTSC Model
Signal system	P	PAL Model

FEATURES

Horizontal Resolution 540 TV Lines

Clear image quility has been achieved by employing a CCD with 410,000 pixels(NTSC), 470,000 pixels(PAL) and optimized WINNER3 DSP CHIP which provides a horizontal resolution of 540 TV lines.

High Sensitivity

The built-in high sensitivity COLOR CCD enables a clear image even in 0.05Lux or lower illumination.

SSNR (Samsung Super Noise Reduction)

Byusing built-in SSNR function manufactured by SAMSUNG TECHWIN, the amount of low illuminance noise has been significantly reduced, and the signal-to-noise ratio (S/N) as well as horizontal resolution have been improved, resulting in a clear and sharp image display even in the dark.

Panand Tilt

Pan and tilt are available after installing camera.

MINI DOME CAMERA 3 USER’S MANUAL

WARNING

The camera needs periodic inspection.

Contact an authorized technician for inspection.

Stop using your camera when you find a malfunction.

If you use your camera around smoke or unusual heat for a long time, a fire may be caused.

Do not Install the camera on a surface that can not support it.

Unless the surface is suitable, it could cause falling or other hazards.

PRECAUTIONS

Do not install the camera in extreme temperature conditions.

Only use the camera under conditions where temperatures are between -10˚C and +50˚C. Be especially careful to provide ventilation when operating under high temperatures.

Do not install or use the camera in an environment where the humidity is high.

It can cause the image quality to be poor.

Do not touch the front glass of the camera.

It is one of the most important parts of camera. Be careful not to be stained by fingerprint.

Do not drop the camera or subject them to physical shocks.

Never keep the camera face to strong light directly.

It can damage the CCD.

Do not expose the camera to rain or spill beverage on it.

GETTING TO KNOW YOUR CAMERA

Front

	Tilt Base
Pan Base	You can adjust up and
You can rotate the lens	down the camera(20°~90°).
from 360˚

Do not handle the camera with wet hands

It could cause an electric shock.

Do not install the camera under unstable lighting conditions.

Severe lighting change or flicker can cause the camera to work improperly.

Never use the camera close to a gas or oil leak.

It can cause malfunctions to occur.

It can cause malfunctions to occur.

Notes

If it gets wet, wipe it dry immediately.

Liquids can contain minerals that corrode the electronic components.

Bottom

Power Input Terminal

BNC Jack

Do not disassemble the camera.

There are no user-serviceable parts inside it.

•If the camera is exposed to spotlight or object reflecting the strong light, smear or blooming may occur.

•Please check the power whether it satisfies the normal specification before connecting the camera.

MINI DOME CAMERA 4 USER’S MANUAL MINI DOME CAMERA 5 USER’S MANUAL MINI DOME CAMERA 6 USER’S MANUAL MINI DOME CAMERA 7 USER’S MANUAL