Samsung SCC-C7435(P), SCC-C7433(P) manual Safety Precautions

Page 2

Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

WARNING

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.

If this power supply is used at 240V ac, a suitable plug adapter should be used.

WARNING

1.Be sure to use only the standard adapter that is specified in the specification sheet. Using any other adapter could cause fire, electrical shock, or damage to the product.

2.Incorrectly connecting the power supply or replacing battery may cause explosion, fire, electric shock, or damage to the product.

3.Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause abnormal heat generation or fire.



4.Securely plug the power cord into the power receptacle. Insecure connection may cause fire.

5.When installing the camera, fasten it securely and firmly. The fall of camera may cause personal injury.

6.Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers filled with water on top of the camera. Doing so may cause personal injury due to fire, electric shock, or falling objects.

7.Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fire or electric shock.

8.If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect the power source and contact the service center. Continued use in such a condition may cause fire or electric shock.

9.If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product

in any way. (SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair.)

10.When cleaning, do not spray water directly onto parts of the product. Doing so may cause fire or electric shock.

-C7433_7435-Eng.indd1

2008-05-20오전1

Image 2
Contents SmartDome Camera Outdoor type User’s Guide C7435-NACover-01.indd 2008-05-20 오전Safety Precautions FCC Statement C74337435-Eng.indd2Important Safety Instructions Contents Video set Preset Zone setAlarm set Auto setRS-485 Clock set Product SpecificationsOther set C74337435-Eng.indd6Product overview Main featuresAbout this guide ComponentsC74337435-Eng.indd8 Names of Each PartYour camera has the following components Things to Keep in Mind During Installation and USE Before installationInitial setting C74337435-Eng.indd10 Setting Communication ProtocolUse number 1~4 PIN of SW901 to set communication Protocol Baud Rate Setting Use PIN 5 and 6 of SW901Setting RS-422A/RS-485 Termination C74337435-Eng.indd12CAM n-1 RS-422A/RS-485 Full Duplex Organization C74337435-Eng.indd13Preparing the cable to connect to the Smartdome C74337435-Eng.indd14C74337435-Eng.indd15 C74337435-Eng.indd16 Cable connection C74337435-Eng.indd17C74337435-Eng.indd18 C74337435-Eng.indd19 Separately sold products for installation C74337435-Eng.indd20Ceiling Mount Adaptor SADT-100CM C74337435-Eng.indd22 C74337435-Eng.indd23 Installation precautionsInstallation ENG C74337435-Eng.indd24C74337435-Eng.indd25 C74337435-Eng.indd26 C74337435-Eng.indd27 C74337435-Eng.indd28 C74337435-Eng.indd29 Camera Setup C74337435-Eng.indd30C74337435-Eng.indd31 C74337435-Eng.indd32 ① Password Undefined ② Password Defined Sync Camera setupCamera ID DAY/NIGHT C74337435-Eng.indd35Night C74337435-Eng.indd36AUTO… Motion DET Those 3 types are like the following C74337435-Eng.indd39C74337435-Eng.indd40 Block TypeZoom Speed Digital ZoomC74337435-Eng.indd42 Display ZoomDisplay ZOOM, you can display the Zoom scale on the screen Display P/T ExitALC Video setIris C74337435-Eng.indd44C74337435-Eng.indd45 Manu C74337435-Eng.indd46Shutter WDRAGC C74337435-Eng.indd48Motion C74337435-Eng.indd49White BAL Focus Mode C74337435-Eng.indd51Special C74337435-Eng.indd52Reverse DNRFlickerless DetailExit menu is used to return to the Main menu Saves the information of the setting condition of the menuPOSI/NEGA C74337435-Eng.indd54Preset C74337435-Eng.indd55Position SET Preset IDPreset Speed Video SETC74337435-Eng.indd57 Zone setPrivacy Zone Zone DIR SET C74337435-Eng.indd58Zone Area SET C74337435-Eng.indd59Location C74337435-Eng.indd60Zone Enable Zone ID SETC74337435-Eng.indd62 Auto setAuto PAN Speed DirectionEndless Pattern C74337435-Eng.indd64Scan Auto Play Auto PlayAuto Return Play NumberAlarm set C74337435-Eng.indd67Alarm OUT SET Alarm Priority SETAlarm in SET Auto SETTurbo P/T Other setProportional P/T Auto CALLanguage CAM ResetFlip C74337435-Eng.indd70Password Clock set RS-485System info Shortcut keys C74337435-Eng.indd74Preset + 1 + 5 + 0 + Enter Preset + 1 + 4 + 8 + EnterAuto Calibration Preset + 1 + 4 + 9 + Enter Function KeyC74337435-Eng.indd76 Product Specifications SCC-C7435P Alarm Inputs Alarm Outputs 3 OUT2 Open Collector, 1 RelayCondition ColorOutline 258ø x 422H Operation Temperature 49F ~ +122F Operation Humidity ~90%Dome 168ø Memo SCC-C7435-JAP.indd.indd 19/2008 120344 P