Samsung SCC-C7433(P), SCC-C7435(P) manual White BAL

Page 51

WHITE BAL

Lights are generally denoted as color temperatures and expressed in Kelvin (K) units. The general light color temperatures are shown below.

10000K

Blue sky

9000K

Rainy

8000K

Cloudy

7000K

 

6000K

Partly Cloudy

 

5000K

Sunny

 

4000K

Fluorescent lamp

3000K

Halogen lamp

2000K

Tungsten lamp

1000K

Candlelight

 

ENG

You can select one of four modes for white balance adjustment as follows:

-ATW1/ATW2(Auto-Tracing White Balance Mode): In these modes, the color temperature is monitored continuously and thereby white balance is set automatically. The following are the approximate supported color temperature ranges in these modes.

ATW1 : 2500K ~ 9300K(*1)

ATW2 : 2000K ~ 10000K(Mode recommended for sodium lighting)(*2)

*1. If the color temperature is out of this range in ATW1 mode, proper white balance may not be obtained. In that case, select ATW2 mode.

*2. In ATW2 mode, if one color is dominated in the shot area, the color can be displayed differently. Therefore, select the mode which is appropriate for the environment.

-AWC8 (Auto-Tracing White Balance Control): In this mode, accurate white balance is obtained by pressing the ENTER while having a white paper in front of the camera. White Balance data will be maintained after set it once. AWC mode is best in locations where the color temperature of light source is constant.

50

-C7433_7435-Eng.indd50

2008-05-20오전1

Image 51
Contents C7435-NACover-01.indd 2008-05-20 오전 SmartDome Camera Outdoor type User’s GuideSafety Precautions C74337435-Eng.indd2 FCC StatementImportant Safety Instructions Contents Auto set Preset Zone setAlarm set Video setC74337435-Eng.indd6 Product SpecificationsOther set RS-485 Clock setComponents Main featuresAbout this guide Product overviewNames of Each Part Your camera has the following componentsC74337435-Eng.indd8 Before installation Initial settingThings to Keep in Mind During Installation and USE Setting Communication Protocol Use number 1~4 PIN of SW901 to set communication ProtocolC74337435-Eng.indd10 Use PIN 5 and 6 of SW901 Baud Rate SettingC74337435-Eng.indd12 Setting RS-422A/RS-485 TerminationC74337435-Eng.indd13 CAM n-1 RS-422A/RS-485 Full Duplex OrganizationC74337435-Eng.indd14 Preparing the cable to connect to the SmartdomeC74337435-Eng.indd15 C74337435-Eng.indd16 C74337435-Eng.indd17 Cable connectionC74337435-Eng.indd18 C74337435-Eng.indd19 C74337435-Eng.indd20 Separately sold products for installationCeiling Mount Adaptor SADT-100CM C74337435-Eng.indd22 Installation precautions InstallationC74337435-Eng.indd23 C74337435-Eng.indd24 ENGC74337435-Eng.indd25 C74337435-Eng.indd26 C74337435-Eng.indd27 C74337435-Eng.indd28 C74337435-Eng.indd29 C74337435-Eng.indd30 Camera SetupC74337435-Eng.indd31 C74337435-Eng.indd32 ① Password Undefined ② Password Defined Camera setup Camera IDSync C74337435-Eng.indd35 DAY/NIGHTC74337435-Eng.indd36 NightAUTO… Motion DET C74337435-Eng.indd39 Those 3 types are like the followingBlock Type C74337435-Eng.indd40Digital Zoom Zoom SpeedDisplay Zoom Display ZOOM, you can display the Zoom scale on the screenC74337435-Eng.indd42 Exit Display P/TC74337435-Eng.indd44 Video setIris ALCC74337435-Eng.indd45 C74337435-Eng.indd46 ManuWDR ShutterC74337435-Eng.indd48 AGCC74337435-Eng.indd49 MotionWhite BAL C74337435-Eng.indd51 Focus ModeC74337435-Eng.indd52 SpecialDetail DNRFlickerless ReverseC74337435-Eng.indd54 Saves the information of the setting condition of the menuPOSI/NEGA Exit menu is used to return to the Main menuC74337435-Eng.indd55 PresetVideo SET Preset IDPreset Speed Position SETZone set Privacy ZoneC74337435-Eng.indd57 C74337435-Eng.indd58 Zone DIR SETC74337435-Eng.indd59 Zone Area SETC74337435-Eng.indd60 LocationZone ID SET Zone EnableAuto set Auto PANC74337435-Eng.indd62 Direction EndlessSpeed C74337435-Eng.indd64 PatternScan Play Number Auto PlayAuto Return Auto PlayC74337435-Eng.indd67 Alarm setAuto SET Alarm Priority SETAlarm in SET Alarm OUT SETAuto CAL Other setProportional P/T Turbo P/TC74337435-Eng.indd70 CAM ResetFlip LanguagePassword RS-485 Clock setSystem info C74337435-Eng.indd74 Shortcut keysFunction Key Preset + 1 + 4 + 8 + EnterAuto Calibration Preset + 1 + 4 + 9 + Enter Preset + 1 + 5 + 0 + EnterC74337435-Eng.indd76 Product Specifications Color Alarm Inputs Alarm Outputs 3 OUT2 Open Collector, 1 RelayCondition SCC-C7435POperation Temperature 49F ~ +122F Operation Humidity ~90% Dome 168øOutline 258ø x 422H Memo SCC-C7435-JAP.indd.indd 19/2008 120344 P