Paradyne 8620, 8820 manual entPhysicalAssetID Entity EntPhysicalAssetID, EntPhysicalIsFRU

7.1.2.1.15entPhysicalAssetID

This object is a user-assigned asset tracking identifier for the physical entity as specified by a network manager, and provides non-volatile storage of this information. If no asset tracking information is associated with the physical component, then this object will contain

azero-length string. Valid Object Value(s):

The following table shows the entPhysicalAssetID assigned by default to the entities. NMS systems can modify these default values for some entities as indicated below.

Table 1-75. entPhysicalAssetID

Entity	entPhysicalAssetID
Chassis	zero-length-string (read-write)
Container	zero-length-string (read-write)
Module	zero-length-string (read-write)
Splitter card	zero-length-string (read-write)
DSL Port	zero-length-string (read-only)
T1/E1 port	zero-length-string (read-only)
OC3 port	zero-length-string (read-only)
Console port	zero-length-string (read-only)
Ethernet Mgmt port	zero-length-string (read-only)
Temp Sensor	zero-length-string (read-only)
Fan	zero-length-string (read-only)
PowerSupply	zero-length-string (read-only)
Management Plane PLD	zero-length-string (read-only)

7.1.2.1.16entPhysicalIsFRU

This object indicates whether or not this physical entity is considered a 'field replaceable unit' by the vendor. If this object contains the value 'true(1)' then this entPhysicalEntry identifies a field replaceable unit. For all entPhysicalEntries which represent components that are permanently contained within a field replaceable unit, the value 'false(2)' should be returned for this object.

Valid Object Value(s):

The following table shows the entPhysicalIsFRU designated for the entities.

Table 1-76. entPhysicalIsFRU (1 of 2)

Entity

Chassis

Container

Module

entPhysicalIsFRU

TRUE

TRUE

TRUE

8000-A2-GB30-10 November 2003 67