Introduction
Congratulations on your purchase of a quality MobileVision Rearview Security Camera. This camera has been designed to provide you with a product that is technologically superior and provide years of trouble free operation.
The information enclosed provides a quick reference of the operations and maintenance of your new Rearview Security Camera.
This product must be installed and used in accordance with this manual. Any alterations to this product that enables it to be used in any way other than intended or designed could distract the driver and result in an accident causing injury or death. Magnadyne Corporation disclaims any and all liability that may result from failure to install and operate in any other manner in which this was intended.
Camera Features
1.
2.Adjustable Viewing Angle
3. | Aluminum | 3 | 4 | |
4. | Removable Wind Deflector | 5 | ||
5. | Illumination LEDs |
|
| |
6. | 1/3" Color CCD Camera Lens | 2 | 6 | |
7. | Photo Sensor |
| ||
| 7 | |||
|
|
|
| |
1. +12 Volts | 5. Ground | 1 |
| |
| 2. N/A | 4. Video |
|
|
| 3. Audio |
|
|
|
Mounting the Camera
1.Select a position to mount the camera that is free of obstructions and mov- ing parts and has a proper viewing angle of the area behind the vehicle.
2.Remove the mounting bracket from the camera and use it as a template to drill mounting holes and a 5/8" cable
3.Position the camera mounting bracket and align with
4.Insert the camera cable into the pass- through hole and secure the camera to the mounting bracket. Use silicone to seal the
Mounting
Screws and
Washers
5/8”
Hole
2