Sleep operation

Timer and sleep operation (Remote control only) (continued)

	MINI COMPONENT SYSTEM
POWER	FUNCTION
ON/STAND-BY
	VOL

PUSH

OPEN

11 When the preset time is reached, playback will start. The volume will increase gradually until it reaches the preset volume. The “ ” indicator will blink during timer playback.

The “DAILY” indicator will blink during timer playback.

12 When the timer end time is reached, the system will enter the power stand-by mode automatically.

Once timer:

The timer will be canceled.

Daily timer:

The timer operates at the same time every day. It will continue until the daily timer setting is canceled. Cancel the daily timer when it is not in use.

Notes:

●When performing timer playback using another unit connected to the USB terminal or AUDIO IN jack, select “USB” or “AUDIO IN” in step 8.

●This unit will turn on or enter the power stand-by mode automatically. However, the connected unit will not turn on or off. To stop the timer playback, follow step “Canceling the timer setting” of this page.

Checking the timer setting:

1Turn the power on and press and hold down the CLOCK/TIMER button.

2Within 10 seconds, press the or button to select “ONCE SET” or “DAILY SET”, and press the MEMORY button.

3Within 10 seconds, press the or button to select “TIMER CALL”, and press the MEMORY button.

Reusing the memorized timer setting:

The timer setting will be memorized once it is entered. To reuse the same setting, perform the following operations.

1Turn the power on and press and hold down the CLOCK/TIMER button.

2Within 10 seconds, press the or button to select “ONCE SET” or “DAILY SET”, and press the MEMORY button.

3Within 10 seconds, press the or button to select “TIMER ON”, and press the MEMORY button.

4Press the ON/STAND-BY button to enter the power stand-by mode.

The radio, compact disc, iPod and USB can all be turned off automatically.

1Play back the desired sound source.

2Press the SLEEP button.

3Within 10 seconds, press the SLEEP button repeatedly to select the time.

10 20 30 ....... 80 90

4“SLEEP” will appear.

5The unit will enter the power stand-by mode automatically after the preset time has elapsed. The volume will be turned down 1 minute before the sleep operation finishes.

To confirm the remaining sleep time:

1While “SLEEP” is indicated, press the SLEEP button.

To cancel the sleep operation:

Press the ON/STAND-BY button while “SLEEP” is indicated. To cancel the sleep operation without setting the unit to the stand-by mode, proceed as follows.

1While “SLEEP” is indicated, press the SLEEP button.

2Within 10 seconds, press the SLEEP button repeatedly to select “SLEEP 00”.

Canceling the timer setting:

1Turn the power on and press and hold down the CLOCK/TIMER button.

2Within 10 seconds, press the or button to select “ONCE SET” or “DAILY SET”, and press the MEMORY button.

3Within 10 seconds, press the or button to select “TIMER OFF”, and press the MEMORY button. Timer will be canceled (the setting will not be canceled).

To use timer and sleep operation together

Sleep and timer playback:

For example, you can fall asleep listening to the radio and wake up to CD in the next morning.

1Set the sleep time (see above, steps 1 - 5).

2While the sleep timer is set, set the timer playback (steps 2 - 9, page 11).

Sleep timer		Timer playback			End
setting		setting			time

	90 minutes			Desired time
	Sleep operation will		Timer playback
	automatically stop		start time

E-12