Sharp TINSZA625AWZZ, CD-SW440N operation manual General control

General control

MINI COMPONENT SYSTEM

POWE R

ON/STAND-BY POWERFUNCTION

ON/STAND-BY

VOL

CD

USB

To turn the power on

The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll and the subwoofer and front speaker will light up in flashing mode.

1Press the DEMO button to cancel the demonstration mode. The subwoofer and front speaker light up will be off.

2Press the ON/STAND-BY button to turn the power on.

Function	Main unit Remote	Operation
	control
Power on /	POWER	Press to turn the
off		power on or to
	ON/STAND-BY
		go to stand-by
		mode.
Demo on /	____	Press to enter to
off		demonstration
		on or off mode.

Display brightness control

To dim the display brightness, hold down the CLEAR/ DIMMER button on the remote control for 2 seconds or more.

Volume auto fade-in

If you turn off and on the main unit with the volume set to 27 or higher, the volume starts at 16 and fades in to the last set level.

Subwoofer and front speaker light up control

The subwoofer and front speaker will light up according to the level of the music source played back. To turn on/off the light, hold down the CLEAR/DIMMER button on the remote control for 2 seconds or more.

Volume control

Turn the volume knob toward VOL +/– (on main unit) or press VOLUME +/– (on remote control) to increase or decrease the volume.

X-Bass control

When the power is first turned on, the unit will enter the extra bass mode which emphasizes the bass frequencies, and “X-BASS” will appear. To cancel the extra bass mode, press the X-BASS button on the remote control.

Bass control

1Press the BASS/TREBLE button to select “BASS”.

2Within 5 seconds, press the VOLUME (+ or –) button to adjust the bass.

Treble control

1Press the BASS/TREBLE button to select “TREBLE”.

2Within 5 seconds, press the VOLUME (+ or –) button to adjust the treble.

Equalizer

When the EQUALIZER MODE button is pressed, the current mode setting will be displayed. To change to a different mode, press the EQUALIZER MODE button repeatedly until the desired sound mode appears.

FLAT NoNoeqeualizationqualization. .

GAME ForForockgameusic. .

CLASSIC ForForclassicalclassicalmusicmusic. .

POPS ForForpoppopmusicmusic. .

VOCAL VocalsVocalsareareenhancedenhanced. .

JAZZ ForForjazzjazz. .

Auto power on function

When you press any of these buttons during stand-by mode, the unit turns on.

● / button on the main unit : The unit turns on and playback of the last function will start (iPod, CD, TUNER, USB, TAPE, AUDIO IN).

●iPod button on the remote control : The unit turns on and iPod function is activated.

●CD button on the remote control : The unit turns on and CD function is activated.

●TUNER button on the remote control : The unit turns on and TUNER function is activated.

●USB button on the remote control : The unit turns on and USB function is activated.

●TAPE button on the remote control: The unit turns on and TAPE function is activated.

●AUDIO IN button on the remote control : The unit turns on and AUDIO IN function is activated.

Auto power off function

In the stop mode of disc, USB or tape operation, the main unit enters the stand-by mode after 15 minutes of inactivity.

E-3