Airlink101 AIC250W user manual Ex. http//172.16.1.181

Page 45

Step 5 Enter your ISP’s DNS IP Address at the DNS IP Address field.

Step 6 Select Enable for the Second HTTP Port and enter a Port Number for the Camera (default is 81).

Important: You must assign a port number that’s not in use by any other application on your network.

Step 7 Click Save to apply the new settings.

Now the Camera with IP Address of 192.168.1.240 has port 81 Open.

Step 8 From one of the computers in Network A, login to the web configuration utility of Network A’s router.

Step 9 Navigate to the router’s Virtual Server or Port Forwarding page.

Step 10 Enable Forwarding of port 81 to the Camera’s IP Address (192.168.1.240) and save the new setting.

Step 11 From one of the computers in Network B, open the web browser (Internet Explorer or Netscape), enter the Internet IP Address (WAN IP) of Network A’s router (172.16.1.1) followed by a colon : and the port number of the Second HTTP Port (81) in the Address Bar and press Enter.

Ex. http://172.16.1.1:81

The remote client in Network B should be able to see the images from the Camera now.

45

Image 45
Contents Ver B Table of Contents Page Introduction Package ContentsGetting Started Click on Install Wizard Installing the Setup WizardPage Gathering Information Network ID Ssid Channel Number Wireless Encryption SettingsGo to Start All Programs AirLink101 IP Camera Setup Wizard Using the Setup WizardPage Page Page Page WEP Click Next Viewing Images IP Camera is ready for use now Infrastructure Mode Configuring Wireless SettingsClick on Configuration and then Wireless Page Page Ad-Hoc Mode Click Save Web Configuration Utility Management System Management Video Management WirelessManagement User Management NetworkLED Control Configuration SystemConfiguration Video Configuration Wireless Encryption Wireless InterfaceWEP Encryption Preamble Select long or short preamble Advanced SettingIP Address Mode Configuration NetworkConfiguration User Configuration Date & Time Configuration Upload Configuration E-mail Tools E-mail Test Tools FTP Server TestTools Factory Reset Tools ResetTools Firmware Upgrade Tools Backup Config.binHelp About Example Viewing Videos from External NetworksClick on Configuration then Network Ex. http//172.16.1.181 Installing IPView Pro Click on Install IPView ProIPView Pro Page Starting IPView Pro Click on the System Configuration button Adding Camera using the Search MethodPage Page Page Adding Camera using the Input IP Method Page Using IPView Pro Status Mode Window Page View Window and View Mode Buttons Control Panel Page Camera Configuration System ConfigurationWeb Configuration At the Record Button, select Motion Record Motion Configuration-1Motion Options Motion Configuration-2Tools Update FirmwareMail Configuration Proxy Server MB 1000 MB Recording ConfigurationAt the Record Button, select Schedule Record Schedule-Recording ConfigurationWeek Mode Others Log List Account About Xplug Control Installing Xplug ControlEnabling ActiveX Page Video should appear now Sending Images via Web Browser AppendixPage Page Page Page Mailsupport@airlink101.com Technical Support