Airlink101 AIC250W user manual Getting Started

Page 5

2. Getting Started

Note: Before using the IP Camera, you’ll need to perform the following tasks:

1.Connect the IP Camera to your network.

2.Install the Setup Wizard.

3.Gather information about your local network address and wireless settings.

4.Configure the IP Camera using the Setup Wizard.

Please follow the steps in this Manual carefully to ensure proper setup of the IP Camera.

Caution: The IP Camera is designed for indoor use only. Direct exposure to sunlight may cause permanent damage to the CMOS sensor. When operating in extremely bright environment, an iris lens or sun visor is recommended to protect the IP Camera.

Step 1 Connect one end of a network cable to the IP Camera and connect the other end to one of the LAN ports of the router or switch (See the diagram below).

Step 2 Power on the IP Camera by connecting one end of the supplied power adapter to the power jack of the Camera and connecting the other end to an electrical outlet.

Step 3 Verify that all the lights on the Camera are lit. If not, verify that all the connections are secure and try again.

5

Image 5
Contents Ver B Table of Contents Page Introduction Package ContentsGetting Started Click on Install Wizard Installing the Setup WizardPage Gathering Information Network ID Ssid Channel Number Wireless Encryption SettingsGo to Start All Programs AirLink101 IP Camera Setup Wizard Using the Setup WizardPage Page Page Page WEP Click Next Viewing Images IP Camera is ready for use now Infrastructure Mode Configuring Wireless SettingsClick on Configuration and then Wireless Page Page Ad-Hoc Mode Click Save Web Configuration Utility Management System Management Video Management WirelessManagement User Management NetworkLED Control Configuration SystemConfiguration Video Configuration Wireless Encryption Wireless InterfaceWEP Encryption Preamble Select long or short preamble Advanced SettingIP Address Mode Configuration NetworkConfiguration User Configuration Date & Time Configuration Upload Configuration E-mail Tools E-mail Test Tools FTP Server TestTools Factory Reset Tools ResetTools Firmware Upgrade Help About Tools BackupConfig.bin Example Viewing Videos from External NetworksClick on Configuration then Network Ex. http//172.16.1.181 IPView Pro Installing IPView ProClick on Install IPView Pro Page Starting IPView Pro Click on the System Configuration button Adding Camera using the Search MethodPage Page Page Adding Camera using the Input IP Method Page Using IPView Pro Status Mode Window Page View Window and View Mode Buttons Control Panel Page Camera Configuration System ConfigurationWeb Configuration At the Record Button, select Motion Record Motion Configuration-1Motion Options Motion Configuration-2Tools Update FirmwareMail Configuration Proxy Server MB 1000 MB Recording ConfigurationAt the Record Button, select Schedule Record Schedule-Recording ConfigurationWeek Mode Others Log List Account About Xplug Control Installing Xplug ControlEnabling ActiveX Page Video should appear now Sending Images via Web Browser AppendixPage Page Page Page Mailsupport@airlink101.com Technical Support