Using
Perform the setup
1Make sure your computer and router are on.
2Remove all memory cards or other USB devices from your frame. Turn it on.
The first time you turn on your frame (after you select your language), the Network connection screen appears.
3When asked "Do you want to connect your frame to a wireless network?", select Yes, then press OK to begin scanning for available networks.
If you select No, you can set up the network later: See Set up your network at a later time, page 21.
4Select your network from the list of available networks, then press OK.
The frame connects to your network and then scans for available computers or other devices.
NOTE: If you have network security turned on, you are prompted to enter your security information. If you are not sure of your network information, contact your system administrator or the person who set up your network.
5Select your home computer from the list, then press OK.
6When the Setup complete message is displayed, press OK.
If you are unable to connect to your network or see your home computer, go to the troubleshooting help on page 29 of this guide or visit www.kodak.com/go/digitalframesupport.
www.kodak.com/go/support | 20 |