Page 42
Appendix
Outside the United States and Canada
In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.
Regulatory compliance and advisory
FCC compliance and advisory
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for additional suggestions. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulation.
36 | www.kodak.com/go/support |
Contents
Kodak Easyshare
Page
OK/4-way navigation Power button Back button
Frame features
Mode button
Stand
Press to highlight An icon, then press OK To select it
Settings-change your frame settings see
Main control panel-icons
Icon Description
Table of contents
Page
Attach the stand
Attaching the stand
Storing the stand
Remove the stand
Attaching the power cable
Buttons Press to
Mode Way/OK Back
Navigation buttons
Navigate right or view the next picture
Setting your language
Setting the time, date, and on/off times
Turning your frame on and off
To set the current date and time Press
Inserting a memory card
SD/SDHC Secure Digital
Inserting a USB device
USB devices are sold separately
Copying pictures to your frame
Press OK
Highlight Copy, and continue with above
Copying pictures from a computer, using a memory card
Copying pictures from a digital camera
Viewing from internal memory
Viewing from a memory card or USB device
To copy pictures into the frame’s internal memory, see
Searching for and viewing your pictures
All-searching and viewing all pictures
All Date
Date-searching and viewing by date
Press to highlight the current picture in the film strip
Folders-searching and viewing by folders
Keywords-searching and viewing by keywords
Press to highlight the first folder in the list
People-searching and viewing by people
Favorites-searching and viewing favorites
Press OK to display thumbnails of pictures of that person
Viewing thumbnails
Changing viewing modes
Play similar pictures
Play similar pictures from collage mode
Picture Finder-auto-play similar pictures
Exit Picture Finder
Deleting pictures from your frame
Pausing play on a single picture
When a slide show is playing, press OK
To resume the slide show, press back or OK
Changing settings and more
Changing frame settings
Settings
To return to the previous screen, press back
Setting Options Language
Highlight Time, then press OK
Set the time
Set the date
Press to move to the next entry Press OK
Set on/off times
Manually set auto on/off times
Setting transitions between pictures
Setting viewing modes
Press OK to exit and save your selections
With Clock, Calendar, or Collage highlighted, press
Check your frame’s current firmware version
Upgrade your frame
Upgrading your firmware recommended
Download the latest firmware
Turn the frame
Changing your frame orientation
Hanging your frame on the wall
Portrait Landscape
Maintaining your frame
Learning more about your frame
Picture frame problems
Try one or more of the following
Return to slide show without doing anything
Screen messages
Screen message Try one or more of the following
Re-setting your frame after losing power
Digital frame specifications
Important safety instructions
Kodak Easyshare P87 Digital Frame
Additional care and maintenance
Limited warranty
Limited warranty coverage
Limitations
Your rights
Regulatory compliance and advisory
Outside the United States and Canada
FCC compliance and advisory
ANSI/UL STD.60950-1
Canadian DOC statement
Russian GOST-R
C22.2 NO.60950-1
Vcci Class B China RoHS
On/off, setting, 23 picture finder
Auto enhancements, setting, 20 automatic
Changing settings Cleaning frame, 28
Copy pictures
Pictures
Portrait, change orientation, 27 power
Keywords, searching by
Random display
About
Turn on frame Upgrade firmware, 21
Time on/off specifications, frame, 32 stand, attaching
Storage capacity, internal memory, 32 support