Kodak P736, P730M manual Set the clock, Tap OK to save your selections

Getting started

Slide between the arrow lights.

Press and hold to move quickly through the time and date settings.

3 Set the clock.

Tap the down arrow to highlight Clock, then slide or tap between the left/right arrow lights to select the current time (based on a 24-hour clock).

4Set the date.

Tap the down arrow to highlight Year/Month/Day, then slide or tap between the left/right arrow lights to select the current date (three separate settings).

5Set your automatic on and off times.

Specify the times you want your frame to automatically turn on and off. NOTE: Make sure the on time is earlier than the off time.

aTap the down arrow to highlight Auto Off Auto On, then tap OK to change the option to Enabled.

bTap the down arrow to highlight Turn Frame On At, then slide or tap between the left/right arrow lights to select the On time (based on a 24-hour clock).

cTap the down arrow to highlight Turn Frame Off At, then slide or tap between the left/right arrow lights to select the Off time (based on a 24-hour clock).

6Tap OK to save your selections.

If your frame loses power (for more than 12 hours), the clock time returns to the factory setting and the automatic on/off times, if set, are disabled. To reset the clock and re-enable your on/off times, see Resetting the clock after losing power, page 33.

www.kodak.com/go/support 7