Kodak P736, P730M manual Resetting the clock after losing power, Protected files

	Troubleshooting and support
If...	Try one or more of the following
Frame freezes up or	■ Unplug the power cable for 5 seconds, then reconnect the cable.
doesn’t work properly.	Press and hold the power button (for about 2 seconds), then
	release.
	■ Reset the frame. Press the Mode and Power buttons (see page ii)
	at the same time, then tap Yes to reset the frame. (Resetting your
	frame does not erase your saved files.)
You set automatic	■ Make sure you Enabled the on/off setting after you set the times,
on/off but the frame	then press OK (not Back). See page 6.
doesn’t turn on and off	■ If your frame loses power, the clock returns to the factory setting
at the specified times.	and auto on/off times are disabled. See Resetting the clock after
	losing power, page 33.
Cannot copy pictures	Storage devices that have FAT (File Allocation Table) 16 formatting can
from one device to	only store up to 512 files in the top level folder (root directory). To make
another even though	sure all your pictures copy properly, format the copy destination to
the copy destination is	FAT32 before copying to it:
not full.	Caution: Formatting deletes all pictures and videos, including
	protected files.
	1 Connect the device to your computer.
	2 Open My Computer and locate the device.
	3 Right-click on it and choose Format.
	4 From the File system drop-down menu, choose FAT32 then click
	Start.

Resetting the clock after losing power

If you turn off the power on the frame or otherwise lose power for half a day or more, the clock time returns to the factory setting and the automatic on/off times, if set, are disabled.

■When you turn the frame back on, the set time screen appears on the frame.

■Slide to set the hour. Tap the left/right arrows to highlight the previous or next setting (hour and minutes), then slide to adjust the setting.

www.kodak.com/go/support 33