Still Picture Mode
To display a single picture, put your Smart Picture Frame in Still Picture Mode.
1Press the Menu button.
2Select Slide Show. Press OK.
3Use the arrow buttons to select Pause Show. Press OK.
4Use the arrow buttons to select Accept Setting. Press OK. The picture on the frame is displayed until you:
m Change the Slide Show settings.
m Use the arrow buttons to move to a different picture.
Slide Show Mode
In Slide Show Mode, the Smart Picture Frame continually cycles through all of the pictures in the frame. If a COMPACTFLASH Card is inserted, pictures on the card are displayed after pictures in the frame memory.
1Press the Menu button.
2Select Slide Show. Press OK.
3Use the arrow buttons to select the time you would like each picture to remain on the screen. Press OK.
4Select Accept Setting. Press OK.
The slide show runs as programmed until you change the settings. The slide show setting does not apply to pictures on a card.
4
13