Marshall electronic CV500 manual Reset, Trouble Shooting, Select RESET using the UP or DOWN button

Page 14
RESET

RESET

Select RESET using the UP or DOWN button.

Select RESET using the UP or DOWN button. RESET: Reset the camera settings to the factory defaults. You can reset the camera setting using the SET button.

 

SETUP

1. LENS

DC

2. EXPOSURE

 

3. WHITE BAL

ATW

4. DAY & NIGHT

AUTO

5. NR

 

6. SPECIAL

 

7. ADJUST

 

8. RESET

 

9. EXIT

 

1080 HD-SDI Camera

26

TROUBLE SHOOTING

PROBLEM

SOUTION

 

● Check that the power cord and line connection between the camera and

 

monitor are properly connected.

 

● Check that video cable is connected with the Analog BNC (Yellow).

 

● When the camera’s HD-SDI BNC output is directly connected to the

Nothing appears on the screen.

monitor’s BNC terminal: Make sure the monitor supports HD-SDI signal input.

● When the camera’s HD-SDI BNC output is connected to the DVR: Make

 

 

sure the DVR supports HD-SDI signal input.

 

HD-SDI output is converted into other format such as DVI and VGA by

 

using video converter: Make sure the converter’s HD-SDI input format

 

● Is lens stained with dirt? Clean your lens with soft, clean cloth.

The image on the screen is dim.

● Set the monitor to the proper condition.

● If the camera is exposed to very strong light, change the camera position.

 

 

Re-adjust the back-

Theimage on the screen is dim, when

● Check if the LEDs are shaded and reflected by the camera ring,camera base, or other

the LED is on.

objects near the camera.

TheLEDs are reflected over the

● Check if the LEDs are shaded and reflected by the camera ring,camera base, or other obje

dome or cover.

cts near the camera.

The image on the screen is dark.

● Adjust the contrast feature of the monitor.

● If there is an intermediate device, set 75Ω properly; Check the termination.

 

The camera is not working

● Check that you have properly connected the camera to an appropriate

properly, and the surface of the

power source.

camera is hot.

 

The SENS-UP function does not

● Check that AGC of EXPOSURE SETUP menu is ‘OFF’.

work.

 

The Motion Detection function

● Check that MOTION DET of SPECIAL SETUP menu is ‘OFF’.

does not work.

 

Color is not correct.

● Check the setting of WHITE BAL SETUP menu .

 

● Ensure the camera is not pointing towards the sun.

 

● Is the camera framing the sun or other bright light source?

 

● If there is an intermediate device, set 75OΩ properly; Check the termination.

The screen flickers continually.

HD-SDI video may not appear to be normal if distance exceeds the

maximum transferrable distance.

 

● When a BNC cable adaptor is used to combine two or more BNC cables

 

for distributed HD-SDI video transfer, make sure the impedance of the

 

adaptor is 75Ω. Otherwise, it may cause shorter transfer distance or

 

broken video transfer.

 

 

27

1080 HD-SDI Camera

Image 14
Contents OPERATION GUIDE Models CV340 Series CV500 SeriesMENU STRUCTURE INFORMATIONMENUFOR USERSTRUCTUREMANUAL, VIDEO, DC LENSOSD Joystick and Button INDOOR Select for indoor installationSHUTTER You can adjust the shutter speed of the lens EXPOSURESHUTTEREXPOSUREAGC LOW Allows automatic gain control from 5.3dB to 20dBBRIGHTNESS Adjust the screen brightness EXPOSURESENS-UPEXPOSUREBRIGHTNESS OFF Deactivates the SENS-UP functionOFF Disable BACKLIGHT mode EXPOSURE DWDRACCE, DEFOGBACKLIGHT MANUAL Select this to fine-tune White Balance manually EXPOSUREBACKLIGHTWHITE BALANCE DELAY You can select day/night switching delay time from. 0s ~ 60s DAY & NIGHTCOLOR, B/WDAY & NIGHTAUTO, EXT BURST Determines whether to transmit the burst signal or notLEVEL Adjust noise reduction level NR Noise Reduction 2DNR, 3DNRSPECIALCAM TITLE CAM TITLE If you enter a title, the title will appear on the monitorDISPLAY Adjust the size and position of the selected area SPECIALD-EFFECTSPECIALMOTION POSITOIN Adjust the positionDEFAULT Set the PRIVACY setting value as default SPECIALPRIVACYSPECIALLANGUAGE PRIVACY Task an area you want to hide on the screenLIVE DPC Auto Dead pixel correction ADJUSTSHARPNESSSPECIALDEFECT LEVEL Level of Auto Dead pixel correctionLCD Select this menu item when using an LCD monitor ADJUSTMONITORMONITOR Choose the appropriate setting for your monitor OSD You can adjust style of fontSelect RESET using the UP or DOWN button RESETTROUBLE SHOOTING