Marshall electronic CV500, CV340 manual Day & Nightcolor, B/W, Day & Nightauto, Ext

DAY & NIGHTCOLOR, B/W

Select DAY & NIGHT using the UP or DOWN button.

You can change the day & night mode between COLOR, B/W, AUTO, or EXT using the LEFT or RIGHT button.

COLOR: The picture is always displayed in color.

B/W: The picture is always displayed in black and white.

You can select and adjust BURST, IR SMART, IR LED, and IR PWM.

BURST: Determines whether to transmit the burst signal or not .

IR SMART: Decrease screen saturation of objects within a short range.

LEVEL: Adjust level of the IR SMART function.

AREA: Select the area to activate the IR SMART.

You can select IR SMART area using the UP, DOWN, LEFT or RIGHT button.

IR LED: Enable/Disable IR LEDs.

IR PWM: Adjust the IR LEDs output level.

SETUP		DAY & NIGHTIGHT
1. LENS	DC	BURST	ON
2. EXPOSURE
		IR SMART	ON
3. WHITE BAL	ATW
		IR LED	ON
4. DAY & NIGHT	AUTO
		IR PWM	------40
5. NR
		RETURN	RET
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT		IR SMART
		LEVEL	--------40
		AREA
		ETURN	RET

1080 HD-SDI Camera 14

DAY & NIGHTAUTO, EXT

Select DAY & NIGHT using the UP or DOWN button.

You can change the day & night mode between COLOR, B/W, AUTO, or EXT using the LEFT or RIGHT button.

AUTO: The mode is switched to COLOR in a normal environment, but switched to B/W mode when ambient illumination is low.

You can select and adjust DELAY, D N, and ND using the LEFT or RIGHT button.

DELAY: You can select day/night switching delay time from. (0s ~ 60s)

D N (AGC): Adjust the brightness of the lighting where the mode switch occurs from day to night.

N D (AGC): Adjust the brightness of the lighting where the mode switch occurs from night to day.

SETUP		DAY & NIGHT AUTO
1. LENS	DC	DELAY		---------5
2. EXPOSURE
		D	N (AGC)	--------75
3. WHITE BAL	ATW
		N	D (AGC)	--------35
4. DAY & NIGHT	AUTO
		RETURN		RET
5. NR

6. SPECIAL

7. ADJUST

8. RESET

9. EXIT

■ EXT function is disabled.

15 1080 HD-SDI Camera