Do not use force to pull the power cord. Don't place anything heavy on the power cord, as this may cause electric shock or fire.
Make sure to turn the power off and disconnect the power plug from the outlet before moving the product. Make sure to disconnect the connection cables from other devices as well. Moving the product without disconnecting the power cord may damage it while moving, and may cause electric shock or fire.
Do not install the product near any heating appliance. There is a risk of fire.
6.Connections and Slots
The diagrams below indicate the locations of the media card slots, USB ports, Power control and how to install the desktop stand.
SD/MMC/XD/MS Slot
USB to Device Port
USB to PC Port
Power Switch
Power Receptacle
Removable Desktop Stand
7.Installing and Removing the Desktop Stand
The desktop stand is removable for convenience in wall mount environments. When installed, the stand can be adjusted whether the frame is in landscape or portrait orientation. When in either landscape or portrait orientation the stand has additional fine adjustments so that the tilt angle of the display face can be adjusted to a wide variety of look and appeal. Use the following procedure for best results:
Installing the Stand
1.Lay the frame with the display face down on a soft cloth to avoid scratches.
2.Insert the stand so that the arrow point of the stand matches to the arrow point of the stand receptacle.
3.Turn the stand counterclockwise until the first click. The stand is now locked into the receptacle with the smallest tilt angle.
4.When you continue to turn the stand counterclockwise further, additional clicks will be felt. Each click increases the tilt angle slight for about 2 clicks yielding maximum tilt angle.
5.Turning counterclockwise another click will become the maximum tilt angle when the frame is in portrait orientation. With each additional counterclockwise click, the tilt angle will decrease accordingly until the hard stop is felt.
Removing the Stand
1.Lay the frame with the display down on a soft cloth to avoid scratches.
2.Move the stand clockwise until the stand unlocks.
8.Setting Up the Frame
Use the following procedure and pictorial below to prepare the unit to play content.
Plug one end of the AC adapter into the
1digital photo frame and plug the other end into a standard AC electrical outlet.
2Insert a memory card into the appropriate slot.
Slide the power switch to the ON position.
3The frame will auto play the content, unless there is no content, in which case the Main Menu will appear.
9.Turning the Frame On and Off.
You can turn the frame on and off two ways.
1.Locate the On/Off Switch on the back of the unit. Slide up to turn On. Slide down to turn Off.
2.Using the remote: Press the Power button.
10.Auto Play
By default, the frame will automatically play a slideshow when power is applied. External media will be checked first starting with the card media slot, followed by the USB port. If there is no media or content externally, the frame will play from internal memory. If there is no content internally, the Main Menu will be displayed. A complimentary slideshow is included so you may instantly see it operate while you become familiar with the operation and controls. If a slideshow is playing from internal memory, and external media is inserted, the frame will halt the current slideshow and automatically begin to play the new inserted media. When the media card is removed, the frame will halt and play from internal memory.
5 | 6 |