Turning Your Photo Frame On/Off

GETTING STARTED

•To turn your photo frame on, set the Power Switch to the “On” position.

•To turn your photo frame off, set the Power Switch to the “Off” position.

Menu Interface Navigation

To select the different menu options and ﬁles of your digital photo frame:

•Use the Navigation keys to make a selection.

•To move the selection up, press

•To move the selection down, press

•To move the selection left, press

•To move the selection right, press

•Press ENTER to conﬁrm the highlighted selection.

•To return to the previous screen, press MENU.

Computer Connection (USB)

Connect the DP frame to a computer with a USB cable to:

•Transfer ﬁles to and from your photo frame’s installed memory cards.

•Perform basic ﬁle management functions.

•To make photo slideshows in Vividshare software. See Creating Slideshows for operation details. To enjoy the slideshows on this DP frame , see Vividshare Mode sections for operation details.

Connecting to a Computer

Connect the photo frame to your computer with a USB cable. Upon connection:

•Your computer will automatically recognize the memory cards installed in your photo frame. Icons representing your installed memory cards will appear as “Removable Disk ” when you open “My Computer”.

	USB Port
	(computer)
	USB Port (mini)
	DP850 / DP852 / DP854
16	Make sure that there’s no USB flash drive connecting to the DP frame
16	before connecting the DP frame to a computer.

GETTING STARTED

Main Menu Screen

Upon turning on the power, your photo frame will display the “ Main Menu ” screen shown below.

•Press the MENU button and then press the UP/DOWN button to select an available card slot.

Selected

Inserted

No Card

Selected

MAIN MENU SCREEN

Inserted: A card icon that is in-color indicates that a memory card has been inserted (installed) in the corresponding slot.

No Card: A card icon that is grayed-out indicates that a memory card has not been installed in the corresponding slot and is not available for use.

Selected: A highlighted frame indicates that the card slot is selected. Only card slots with an installed memory card may be selected.

Highlighted: the Video icon is being selected. Memory: Built-in Memory 4 IN 1: SD / MMC / MS / XD Card

CF: CF cardUSB: USB flash drive

You can save pictures on the Memory ( built-in memory ) and enjoy them as
a demo slideshow. see File Manager section for operation details.
The demo slideshow will automatically start in approximately 8 seconds if
there is no card inserted.
The demo slideshow will stop when a card is inserted or any button is
pressed.	17