Press the MENU button to access the main menu again.
1 | 3 |
4 | |
| 2 |
Equipment Select: Use the Up and/or Down button to select Equipment1 Select and then2 press the ENTER button
to confirm.3 Use the Up and/or Down button to select between1 USB and SD/MMC2 and then press the ENTER button to confirm. Then press the MENU button3 to exit
the menus.4 NOTE: You can also use the USB and/or Card button on the remote, or the USB/Card button on the main unit to select between the two options.
Press the MENU button to access the main menu again.
| 3 |
|
| 1 | 4 |
| 2 |
|
System Setup, Picture Display Mode: | ||
Use the | Up 1 and/or Down 2 button to | |
select System Setup and then press the | ||
ENTER button 3 to confirm. | ||
Use the | Up 1 and/or Down 2 button to | |
select | Picture Display Mode and then | |
press the ENTER button | 3 to confirm. | |
Use the | Up 1 and/or Down 2 button to | |
select between 16:9 (wide) and 4:3 (stan- dard) and then press the ENTER button
to confirm.3 Then press the MENU button to exit
the menus.4 NOTE: You can also use the 4:3/16:9 but- ton on the remote to select between the two options.
10