PROBLEM | POSSIBLE SOLUTION |
|
|
No power. | Make sure that the AC adapter is connected |
| correctly as shown on page 8. |
The unit is automatically in Standby mode. | Disconnect the AC adapter and reconnect as |
| shown on page 8. |
No picture. | Ensure that the power is on and that a flash |
| drive and/or SD/MMC card are inserted. |
The controls on the main unit and/or the | Press the Power On/Off button to turn the unit |
remote do not work. | off and then back on. If that does not work, with |
| the unit off, disconnect the AC adapter and |
| reconnect as shown on page 8. |
Picture is distorted. | The picture may be distorted while using the |
| Prev/Next buttons. This is normal and not a |
| malfunction of the unit. |
The remote control does not work. | Make sure that a fresh battery is inserted as |
| shown on page 7. Also, refer to the effective |
| distance of the remote control transmitter and |
| the notes regarding remote operation on that |
| page. |
CARE AND MAINTENANCE
1. Clean this unit with a damp (never wet) cloth. Solvent or detergent should never be used.
2. Avoid operating this unit under direct sunlight or in hot, humid or dusty places.
3. Keep this unit away from heating appliances.
13