Vornado VOD VH101 OPERATING CONTROLS, Care & Maintenance, Resetting Your Vornado Heater, Fan Only

VH101 OPERATING CONTROLS

	1	POWER ON/OFF
	2	MODE SWITCH
1	2	HIGH HEAT
		750 watts

FAN ONLY

Fan will run continuously

LOW HEAT 350 watts

CARE & MAINTENANCE

The VH101 has no user serviceable parts. Do not disassemble the unit as doing so will void your warranty. If service is required, return your heater to Vornado (see Warranty section for instructions).

The motor inside your VH101 is permanently lubricated and requires no oiling.

Because your VH101 moves air, it will require regular cleaning. Be sure to unplug the unit prior to any cleaning activity. Use a vacuum cleaner with the brush attachment to clean any accumulated dust on the front grill and the side air inlets.

RESETTING YOUR VORNADO HEATER

Your Vornado Heater has a multi-level safety shut-off system designed to prevent overheating. Overheating may occur when the inlets or outlet are blocked, a foreign object prevents the blade from turning, or the appliance tips over. If this happens, the safety shut-off system will cut power to the heat element and you will need to manually reset the heater.

1.Set the POWER switch to OFF and unplug the unit.

2.Remove any obstructions.

3.Wait 5 –10 minutes, allowing the unit to cool down.

4.Plug in the unit and place in desired position.

5.Set the POWER switch to ON. Your Vornado Heater should now function normally.

If the safety shut-off system repeatedly shuts off your heater or if it will not reset after following the above procedure, DO NOT ATTEMPT TO DISASSEMBLE THE UNIT. Call Vornado Consumer Services Department toll-free at 1-800-234-0604.

6 English