Vornado VH101BK, CL7-016B, CL3016B RA, VOD manual How To Use, Save These Instructions

Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).

Operate this heater only in its upright position. Do not operate this heater on an elevated surface such as a shelf or desktop. Use only while placed on the floor.

This heater is equipped with a thermal safety shut-off system, designed to turn off the heater when an internal overheating condition is detected (see How To Use “RESETTING YOUR VORNADO HEATER,” to determine how to check and reset the heater).

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

Do not operate this product with any electronic speed-control device on the same circuit.

Do not use heater to dry human or animal hair/fur or articles of clothing.

HOW TO USE

Using your Vornado® VH101 is easy. Just follow these simple steps:

1.Position your VH101 so the vortex beam of warm air is directed across the room unobstructed. Position it in a location that is representative of the room temperature. The unique side-angled air inlets allow the heater to be placed closer to walls than possible with most ordinary heaters (but do not place close to combustibles). Avoid areas of temperature extremes such as cold drafts and heat registers. Please refer to IMPORTANT INSTRUCTIONS at the beginning of this owner’s guide.

2.Plug the power cord into a standard wall outlet.

3.Set the POWER switch to ON. The amber light will be on anytime the POWER is on.

4.Set the mode switch to HIGH or LOW HEAT, or select the center position on the switch for FAN ONLY.

5.Any servicing should be performed by an authorized service representative.

6.Save the retail carton and cord twist-tie to use when storing the heater in the summer and spring seasons. Secure the cord by using the provided twist tie, or if you no longer have the twist- tie, simply wrap the cord with a rubber band. Place the heater back into the retail carton and close top flaps to avoid dust accumulation on and in the heater.

SAVE THESE INSTRUCTIONS

English 5