Troubleshooting
If you are having a problem with your unit, check this list for a possible solution before calling for service.
If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service.
Symptom
No sound is heard.
Unable to record on an MD.
Poor radio reception.
Possible Cause
Connections are incorrect, or loose.
•You are using a prerecorded MD.
•The MD is
•The antenna is not connected correctly.
Action
Check all connections and make corrections. (See pages 6 – 9.)
•Change it with a recordable MD.
•Unprotect the MD. (See page 33.)
•Reconnect the antenna securely.
Unable to operate the remote control.
•The AM loop antenna is too close to the unit.
•The FM antenna is not properly extended and positioned.
•The path between the remote control and the remote sensor on the unit is blocked.
•Change the position and direction of the AM loop antenna.
•Extend FM antenna to the best reception position.
•Remove the obstruction.
Loaded CDs and MD cannot be ejected.
• | The batteries have lost their charge. | • | Replace the batteries. (See page 9.) | |
• | The main AC power cord is not |
| • | Plug in the AC power plug. |
| plugged in. |
|
| |
The CD does not play.
The CD skips.
If “AUX DIGITAL UNLOCK” appears in the main display.
If “CAUTION!” appears in the main display.
•The Disc Lock function is in use.
The CD is upside down.
The CD is dirty or scratched.
There is no digital device connected to the AUX terminal.
Something is wrong with your unit.
•Turn off the Disc Lock function. (See page 31.)
Put the CD in with the label side up.
Clean or replace the CD. (See page 55.)
Connect a digital device using digital optical cord. (See page 8.)
Unplug the unit immediately, then consult your dealer.
Operations are disabled.
The |
| Unplug the unit then plug it back in. |
malfunctioned due to external electrical |
|
|
interference. |
|
|
When you turn on the unit in the POWER
SAVING mode
A mechanical noise will be heard from the MD recorder section. This is a startup noise of power supply to the MD mechanism, not a malfunction of the unit.
