Continued
DIVIDE Function
This function allows you to divide one track into two separate tracks. It is useful, for example, when you want to add track marks at a certain point within a track or if you want to separate a recording.
• To stop any time during editing process, press EDIT.
On the unit ONLY:
1 Insert an MD you want to edit into the MD loading slot.
2 Press EDIT.
The source is changed to “MD,” and the MD recorder enters editing mode (with DIVIDE function selected).
3 Press SET.
The first track (or the current track) start playing.
4 Push the joy control rightward (¢ 
) or leftward (4 
) to select the track you want to divide.
The selected track starts playing.
Ex. When you want to divide track 5
If the track has a title, it is show here.
•If you do not push the joy control rightward (¢ 
) or leftward (4 
), the same track plays repeatedly.
•You can push the joy control upward (` 
) or downward (1 
) to find the dividing point.
5 Press SET when you find the point where you want to divide the track.
The MD recorder repeats the selected point — a 3- second period following the dividing point.
•If the dividing point is satisfactory, go to step 7.
•If the dividing point is not satisfactory, go to the next step.
6 Push and hold the joy control rightward (¢ ) or leftward (4 ) to precisely adjust the dividing point.
•You can shift the dividing point up to ±128. This range (±128) corresponds to approximately ±8 seconds from the original point (Position 0).
Ex. When adjusting the point by +20
When you stop holding the joy control, the unit repeats the newly selected dividing point.
•When you find the right position, go to the next step.
•If you want to cancel the dividing point, press CANCEL, then select the correct dividing point.
7 Press SET.
8 Press ENTER/DEMO to finish the editing procedure.
9 Press 0for the MD recorder to eject the MD.
“WRITING” appears while the editing you have made is being recorded on the MD.
To join the divided tracks again, see the JOIN function.
