Continued
Changing the Main Display Screen
You can change the screen pattern which appears in the main display.
On the unit ONLY:
You can do the following procedure while the unit is turned on or in standby mode.
1 Press ENTER/DEMO.
The DISPLAY MODE screen appears.
•If “MODE OFF” appears, press ENTER/DEMO again.
2 Push the joy control upward (` 
) or downward (1 
) to select the screen pattern you want.
DEMO: To show the display demonstration in the main display.
When the AC power is unplugged, this setting is automatically restored unless you have stored another setting in backup memory. See “To store the selected main display screen in backup memory” on page 13.
DOLPHIN: To make dolphins swim in the main display. You can also select the starting- time (no operation period) when to start the dolphin screen.
OFF: To cancel the display demonstration and the dolphin screen.
3 When selecting “DOLPHIN” in the above step: Push the joy control repeatedly rightward (¢ 
) or leftward (4 
) to select the
•You can select the
4 Press SET to finish the setting.
How these settings work
•When selecting “DEMO”: Display demonstration starts.
If you do not cancel the display demonstration by pressing ENTER/DEMO, display demonstration automatically starts in the following cases:
–2 minutes after the unit is turned off.
–When no operation is done for more than 2 minutes.
•When selecting “DOLPHIN”:
–If the unit is turned on:Dolphins start swimming in the lower portion of the main display.
If you press any button while dolphins are swimming in the main display, normal screen (see illustration below) resumes. However, dolphin starts swimming again if no operation is done for your specified
–If the unit is turned off (on standby):“DOLPHIN ON!” appears in the main display, and the unit is turned off again.
•When selecting “OFF”:
Both display demonstration and dolphin screen are canceled, and one of the following screens (normal screens) appears in the lower portion of the main display.
While recording or editing an MD
Display demonstration and dolphin screen will not appear.
Normal screens
Playback screen: while playing any source or receiving a station
Stop screen: while pausing or receiving no station:
•If the source is “TAPE” or “AUX DIGIT.,” only the playback screen will appear.
