Continued
4 Press SET to enter the selected title entry mode.
Character entry position
5 Press CHARACTER to select the character set you want.
•Each time you press the button, the character sets change as follows:
Capital letters Small letters
Numerals
6 Input a character.
1)Press the character entry button for a character you want to input.
Examples:
• To input an “A” or “a,” press ABC once.
To input a “B” or “b,” press ABC twice.
To input a “C” or “c,” press ABC three times.
•To input a symbol, press MARK repeatedly until the mark you want appears.
•To input a numeral, press 0 – 9.
•To move the character entry position while entering a title, press ¿(10) or fl(+10).
•If you have entered an incorrect character, press CANCEL to cancel the last entry.
2)Press the button for the next character you want to input.
•If the next character you want to input is assigned to the same button you have just pressed in step
7 Repeat steps 5 and 6 to enter other characters.
•The main display can only show 8 characters at a time. If you enter the 9th character, the first character disappears, and so on.
8 Press ENTER to finish the current title entry.
“EDITING” appears for a while, then the unit enters title entry mode again.
• You can assign another title by repeating steps 3 to 8.
9 Press MD TITLE (or ENTER again) to finish the title entry.
10 Press 0for the MD recorder to eject the MD.
“WRITING” appears while the editing you have made is being recorded on the MD.
Available Symbols are as follows:
(Blank)
You can assign titles during play or recording
•During play: Entering a track title
The MD recorder repeats playback of the current track until you press ENTER in step 8 above. When you press ENTER, the next track will be played.
Entering a disc title
The MD recorder repeats playback of all tracks of the MD until you press ENTER in step 8 above. When you press ENTER, the MD recorder enters the track title entry mode.
•During recording: Entering a track title
The MD recorder continues recording even after you press ENTER in step 8 above. When you press ENTER, a track title is assigned to the track where you have started the title entry.
•During CD Synchronized Recording and the First Track Recording:
You can assign the disc title, and 15 track titles one after another as recording goes on. The track titles you have entered are automatically assigned to the tracks recorded on the MD in sequential order. If you enter 16th track title or more, they are ignored.
If “NO OPERATION!” appears
You have tried to use the buttons on the unit while entering a title using the remote control. Use the remote control only.