JOIN Function
This function allows you to join two adjacent tracks into one track.
• To stop any time during editing process, press EDIT.
On the unit ONLY:
1 Insert an MD you want to edit into the MD loading slot.
2 Press EDIT.
The source is changed to “MD,” and the MD recorder enters editing mode (with DIVIDE function selected).
5 Press SET.
•If you have selected wrong tracks, press CANCEL, then select the correct tracks.
6 Press ENTER/DEMO to finish the editing procedure.
7 Press 0for the MD recorder to eject the MD.
“WRITING” appears while the editing you have made is being recorded on the MD.
To divide the joined tracks, see the DIVIDE function.
•If “JOIN” is not shown (“ – – –
3 Push the joy control downward (1 ) or upward (` ) to select “JOIN,” then press SET.
4 Push the joy control downward (1 ) or upward (` ) to select the two adjacent tracks you want to join.
Ex. When you want to join tracks 2 and 3
MOVE Function
This function allows you to move a track to the position you prefer. It is useful to change the order of the tracks as you like.
• To stop any time during editing process, press EDIT.
On the unit ONLY:
1 Insert an MD you want to edit into the MD loading slot.
2 Press EDIT.
The source is changed to “MD,” and the MD recorder enters editing mode (with DIVIDE function selected).
•If “MOVE” is not shown (“ – – –