Continued
To stop playback for a moment
Press CD #/ 8.
To resume play, press CD #/ 8 again.
To locate a particular point in a track during play
On the unit:
Push the joy control upward (` ) or downward (1 ).
•Upward (` ):
•Downward (1 ) :
On the remote control:
Press and hold ¢ or 4.
•¢ :
•4 :
To go to another track
On the unit:
Push repeatedly (or hold) the joy control rightward (¢ ) or leftward (4 ).
•Rightward (¢ ) : Skips to the beginning of the next or succeeding tracks.
•Leftward (4 ): Goes back to the beginning of the current or previous tracks.
On the remote control:
Press ¢ or 4 repeatedly.
•¢ :Skips to the beginning of the next or succeeding tracks.
•4 :Goes back to the beginning of the current or previous tracks.
To go to another track directly using the number buttons
Pressing the number button(s) allows you to start playing the track number you want.
Ex.: For track number 5, press 5.
For track number 15, press +10, then 5. For track number 20, press +10, then 10.
For track number 32, press +10, +10, +10, then 2.
Programing the Playing Order of the Tracks
— Program Play
You can arrange the order in which the tracks play before you start playing. You can program up to 32 tracks.
1 Load CDs.
•If the current playing source is not the CD player, press CD # / 8, then 7before going to the next step.
2 Press PLAY/REC MODE (or PLAY MODE on the remote control) so that “ CD PROGRAM” appears in the main display.
The PRGM indicator also lights.
•Each time you press the button, play mode changes as follows:
Program play |
| Random play |
(CD PROGRAM) |
| (CD RANDOM) |
Continuous play
(CD CONT.)
3 Press one of the disc number buttons (CD 1, CD 2, and CD 3) to select the disc number you want to play.
•When using the buttons on the unit, you can use the joy control to select the CD number by pushing it upward (` ) or downward (1 ).
Disc No. and Track No. | Step No. |
|
Ex. Disc No. 1 is selected
4 Select the track from the disc selected in the above step.
On the unit:
Push the joy control rightward (¢ ) or leftward (4 ) to select the track number, then press SET.
On the remote control: Press the number buttons.
•For how to use the number buttons, see “To go to another track directly using the number buttons” to the left.
Ex. Track No. 5 is selected
5 Program other tracks you want.
•To program tracks from the same disc, repeat step 4.
•To program tracks from a different disc, repeat steps 3 and 4.
6 Press CD # / 8.
The tracks are played in the order you have programed.
To stop during play, press 7.
To exit from Program play mode, press PLAY/REC MODE (or PLAY MODE on the remote control) once or twice, before or after play, so that the unit enters another playback mode (Random play or Continuous play mode).