To preset stations manually — Manual Presetting
1 Tune in the station you want to preset.
• See “Tuning in a Station” on page 18.
2 Press SET.
The current preset number starts flashing.
3 Select a preset number.
On the unit:
Push the joy control rightward (¢ 
) or leftward (4 
).
•Rightward (¢ 
): to increase the preset numbers.
•Leftward (4 
): to decrease the preset numbers.
On the remote control: Press the number buttons.
Ex. For preset number 5, press 5.
For preset number 15, press +10, then 5. For preset number 20, press +10, then 10.
4 Press SET again.
The tuned station in step 1 is stored in the preset number selected in step 3.
•Storing a new station on a used number erases the previously stored one.
When you unplug the AC power cord or if a power failure occurs
The preset stations will be erased in a few days. If this happens, preset the stations again.
Tuning in a Preset Station
1 Press FM/AM.
The unit automatically turns on and tunes in the previously tuned station (either FM or
•Each time you press the button, the band alternates between FM and AM (MW/LW).
2 Select a preset number.
On the unit:
Push the joy control rightward (¢ 
) or leftward (4 
).
•Rightward (¢ 
): to increase the preset numbers.
•Leftward (4 
): to decrease the preset numbers.
On the remote control: Press the number buttons.
Ex. For preset number 5, press 5.
For preset number 15, press +10, then 5. For preset number 20, press +10, then 10.
Receiving FM Stations with RDS
RDS allows FM stations to send an additional signal along with their regular program signals. For example, the stations send their station names, as well as information about what type of program they broadcast, such as sports or music, etc.
When tuned to an FM station which provides the RDS service, the RDS indicator lights on the display.
With the unit, you can receive the following types of RDS signals.
PS (Program Service):
Shows commonly known station names.
PTY (Program Type):
Shows types of broadcast programs.
RT (Radio Text):
Shows text messages the station sends.
EON (Enhanced Other Networks):
Provides the information about the types of the programs sent by other RDS stations than the one being received.
RDS operations are possible only using the remote control. You can use the buttons printed in orange on the remote control.
