Congratulations! You are the proud owner of a NuVuetm Digital Picture Frame. Boasting
Package Contents
Before using the NuVuetm, be sure to check all the accessories contained in the package. NuVuetm comes with the following items:
1.NuVuetm unit with desktop stand
2.A.C. Power Adapter
3.USB Cable
4.Composite TV Out Cable
5.User Manual
Features
9High resolution 7” TFT display
9Plays images in slideshow format
9Plays MP3 audio
9Plays MPEG Video
9Plays Audio Slideshow
9
9Generous 256MB internal memory
9USB Port for PC connection
9USB Port for device connection – thumb drive, camera, etc.
9TV Out to display images on TV
9Sleek decorative design
Connections
Use the guide below for power connection and media insertion. Plug one end the AC Adapter into the Digital Photo Frame and plug the other end into a standard
1.Plug one end the AC Adapter into the Digital Photo Frame and plug the other end into a standard
2.Insert a memory card into the appropriate slot.
3.Slide the Power Switch to the ON position.
4.If not already selected, scroll to the appropriate memory card type on the first menu screen by using the Arrow Buttons on the Remote Control.
5.Press the ENTER Button to confirm the selection.
6.On the next menu, scroll using the Arrow Buttons to select PHOTO.
7.On the next menu, press SLIDESHOW on the Remote Control to display images.
Color Setup – These functions are used to adjust the LCD screen to suit your taste and lighting conditions. Adjustments that may be made are Brightness, Contract, and Saturation. Each of these functions, when selected includes a secondary screen with a relative values with “1`” as minimum and “20” as maximum. Use the Up and Down buttons to increase and decrease the value respectively.
USB Port Configuration
This function is used to select between USB connect to PC or device and USB to Printer. Use the Up and Down buttons to select the desired function. Press Enter to select. The selection is confirmed by a check mark next to the function.
On Screen Controls While Playing a Slideshow
Once a slideshow is playing press the OSD button. A control screen appears as follows. Use the direction buttons to navigate to the desired function. Press Enter to activate.
On Screen Controls While Playing an Audio Slideshow
Once an audio slideshow is playing press the OSD button. A control screen appears as follows. Use the direction buttons to navigate to the desired function. Press Enter to activate.