TABLE OF CONTENTS |
|
DECLARATION OF CONFORMITY | 2 |
SAFETY SYMBOLS | 4 |
SAFETY PRECAUTIONS | 5 |
ELECTRICAL HAZARDS | 7 |
TOOL STICKERS & TAGS | 9 |
HOSE TYPES | 10 |
HOSE RECOMMENDATIONS | 11 |
FIGURE 1. TYPICAL HOSE CONNECTIONS | 11 |
HTMA REQUIREMENTS | 12 |
OPERATION | 13 |
FIGURE 2. FELLING A TREE | 14 |
FIGURE 3. CROSSCUTTING LOGS/LIMBS WITH PRESSURE ON BOTTOM | 15 |
TOOL PROTECTION & CARE | 17 |
TROUBLESHOOTING | 18 |
SPECIFICATIONS | 19 |
ACCESSORIES | 19 |
SERVICE TOOLS | 19 |
CS25/28 PARTS ILLUSTRATION | 20 |
CS25/28 PARTS LIST | 21 |
IMPORTANT
To fill out a Product Warranty Validation form, and for information on your warranty,
visit Stanleyhydraulics.com and select the Company tab, Warranty.
(NOTE: The warranty Validation record must be submitted to validate the warranty).
SERVICING: This manual contains safety, operation, and routine maintenance instructions. Stanley Hydraulic Tools recommends that servicing of hydraulic tools, other than routine maintenance, must be performed by an au- thorized and certified dealer. Please read the following warning.
WARNING
SERIOUS INJURY OR DEATH COULD RESULT FROM THE IMPROPER REPAIR OR SERVICE OF THIS
TOOL.
REPAIRS AND / OR SERVICE TO THIS TOOL MUST ONLY BE DONE BY AN AUTHORIZED AND
CERTIFIED DEALER.
For the nearest authorized and certified dealer, call Stanley Hydraulic Tools at the number listed on the back of this manual and ask for a Customer Service Representative.
CS25/28 User Manual ◄ 3
