CONNECTING POWER
ON
OFF
Plug the DC power jack of the adapter into the DC socket in the DPF. Plug the power adapter into the mains point.
Switch on at the mains.
Switch the ON /OFF switch on the frame to ON.
•You can leave the power switch on, and use the 
button on the handset to turn the frame on or set it to Standby mode.
•To turn off the power off, slide the ON/OFF switch to OFF.
If the DPF is being switched on for the first time, or after a default setting reset, you must first select a display language.
Use the (
) or (
) buttons on the DPF or the 
buttons on the handset to make your selection.
Press the 
button on the DPF or OK on the handset to confirm.
In the next screen, Use the (
) or (
) buttons on the DPF or the 
buttons on the handset to select YES or NO.
Press the 
button on the DPF or OK on the handset to confirm.
There are 14 languages to choose from. Make your selection and press
the 
button on the DPF or OK on the handset to confirm.
The welcome screen will briefly display followed by the Main Menu.
Page 8