Technika A700 Getting Started Handset Preparation, Remove the old battery. Place the new bat

Page 7

GETTING STARTED

HANDSET PREPARATION

Remove the protective strip from the battery compartment to activate the battery.

If the handset behaves erratically or fails to operate the battery should be replaced.

1: Press the catch at the side of the battery compartment. Slide out the battery cage

2:Remove the old battery. Place the new bat-

tery in the cage with the polarity as shown. Close the cage.

There is a risk of fire and burns if the battery is handled improperly. Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.

Do not attempt to open or service the battery. Replace only with the battery designated for this product. Discard used batteries in accord- ance with recycling regulations in force in your area.

PLACEMENT

 

Remove the stand from the

Screw the stand fitmly

clip at the rear of the frame

into the threaded insert

Place the frame on a firm stable surface where it is unlikely to fall or get knocked off.

Page 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents A700 Operate normally, or has been dropped Follow all instructionsContents Unpacking IintroductionPicture Formats Files and FoldersPrevious/Left button Controls and FunctionsNext / Right button Menu Remote Handset Handset Keys and FunctionsOSD Tery in the cage with the polarity as shown. Close the cage Remove the old battery. Place the new batPlacement Getting Started Handset PreparationButton on the DPF or OK on the handset to confirm Connecting Power OFFPress the button on the DPF or OK on the handset to confirm This icon indicates the current choice Installing a USB Device or Memory CardViewing Photos USB Drive SD Card, etcZoom and PAN Viewing Pictures in Slide Show ModePause Mode Viewing PicturesDuring a slideshow Press the OSD key Thumbnail ModeTo rotate the picture, highlight and press the OK key Viewing the Clock Press or to select a Slide Show Time System SetupAccess the Main Menu Select Setup Press OK Press or to select the Photo Setup MenuPress Off the slides change with no effects in betweenSelect Clock or Calendar CLOCK/CALENDAR SetupSetting the Time Main MenuTo select Set date format. Press Setting the DateSetting the Language Setting the Brightness, Contrast and SaturationPress To select Default. Press Power On and Power OffPress or to select Power on/Power off. Press Default This setting returns the DPF to factory settingsHandset is erratic TroubleshootingDPF will not switch on DPF will not play pictures on a cardIn-store for details Care and CleaningWeight Grams WarrantyDelamare Road, Cheshunt, Herts, EN8 9SL
Top Page Image Contents