Sylvania SDPF1008 user manual Photo, USB source, Default, Exit

3.4.5 USB source

This option allows the user to set the media which want to play. When connect the USB to the computer it will show Removable DISK. then it can read the message in the MS card or SD/MMC card.

3.4.6 Default

By setting this option, all settings will be reset to the original system settings

3.5 Exit

Leaves the setup menu, and goes back to the main menu.

4.Photo

After choosing(Photo)from the main menu, press the ENTER key, and the system will automatically detect whether or not a storage device has been connected (USB drive or memory card). If no storage device has been connected, the system will go back to the main menu. After the storage device has been connected and correct read/write access has been confirmed, the unit will auto play photo.If the auto play setting is off. the system will enter the mode chosen by the user (please refer to the(3.1.5 Browse)section for settings details). If the user has selected(File Mangager)for playlist manage-ment, the screen on the lower left will appear; if the user chooses(Thumbnail)for playlist management, the screen on the lower right will appear. Under(Photo)mode, the system only supports the display of images in JPG,BMP,GIF format.

9