Sylvania SDPF1008 Photo Setting Display Interval, Transition Effect, Show type, Slide mode

Page 7

The adjustment screen for the SETUP menu is as follows:

Press the buttons to select the options, then press the ENTER to confirm.

3.1Photo Setting

3.1.1 Display Interval

This option can be used to set the length of time for display of each image. There are six options: 5 seconds, 10 seconds, 15 seconds, 30 seconds, one minute, or three minutes.

3.1.2 Transition Effect

This option is used to set the transition effect as images change.

3.1.3 Show type

This option is used to set the display type.There are two available option.Fit screen or full screen.

3.1.4 Slide mode

This option is used to set the slide mode.There are three available option. Normal,Motion,date&time.

5

Image 7
Contents USER’S Manual Contents Edit Product introduction Button operation introduction for main unit Function main menu System SettingsShow type Photo Setting Display IntervalSlide mode Transition EffectBrowse Display Setup 3.3.1 BrightnessAuto Play TFT Brightness ContrastEncoding Repeat modeLogo type Exit DefaultPhoto USB sourcePhoto+Music MusicCalendar MovieDate Display Set Date ClockClock Display AlarmSet Time Enable Auto-PowerPower On Enable Edit Power off EnableDelete CopyBasic Operations FavoriteScreen Saver Repetitive Playback Fast forward/ Fast rewind playVol + / Vol-/ Mute NEXT/ Prev FunctionRotate JPG Images Zoom Enlarge ImagesDaily protection and maintenance