Pioneer D3000SPL owner manual Before Using This Product, Information to User, About This Product

Page 1

CLASS D MONO AMPLIFIER

AMPLIFICATEUR MONO DE CLASSE D

Owner’s Manual

PRS-D3000SPL

Mode d’emploi

PIONEER CORPORATION

4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN

Before Using This Product

Thank you for purchasing this PIONEER product. It is designed to give you many years of enjoyment.

PIONEER SUGGESTS USING A PRO- FESSIONAL INSTALLER DUE TO THE COMPLEXITY OF THIS PRODUCT. Please read all instructions and WARN- INGS in this manual before attempting operation. Should you have any questions, contact your nearest Pioneer authorized dealer or installation specialist.

Information to User

Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.

Important

The serial number of this amplifier is writ- ten on the bottom of the unit. For your own security and convenience, write it down on the enclosed warranty card. Keep the card handy for future reference.

After-sales service for Pioneer products

Please contact the dealer or distributor from where you purchased the product for its after-sales ser- vice (including warranty conditions) or any other information. In case the necessary information is not available, please contact the companies listed below:

Please do not ship your product to the companies at the addresses listed below for repair without advance contact.

7U.S.A.

Pioneer Electronics (USA) Inc.

CUSTOMER SUPPORT DIVISION P.O. Box 1760

Long Beach, CA 90801-1760 800-421-1404

7CANADA

Pioneer Electronics of Canada, Inc.

CUSTOMER SATISFACTION DEPARTMENT

300 Allstate Parkway Markham, Ontario L3R OP2 1-877-283-5901

For warranty information please see the Limited Warranty sheet included with your product.

Product registration

Visit us at the following site:

1Register your product. We will keep the details of your purchase on file to help you refer to this information in the event of an insurance claim such as loss or theft.

2Receive updates on the latest products and tech- nologies.

3Download owner’s manuals, order product cata- logues, research new products, and much more.

About This Product

This product is a class D amplifier for the subwoofer. If both L (left) and R (right) channels are connected to the RCA input of this product, output is mixed because this product is a mono amplifier.

CAUTION

Never replace the fuse with one of greater value or rating than the original fuse. Use of an improper fuse could result in over- heating and smoke and could cause dam- age to the product and injury including burns.

WARNING

• Handling the cord on this product or cords associ-

ated with accessories sold with the product will

expose you to lead, a chemical known to the State

of California and other governmental entities to

cause cancer and birth defects or other reproduc-

tive harm. Wash hands after handling.

• Always use the recommended battery wire and

ground wire, which is sold separately. Connect the

battery wire directly to the car battery positive ter-

minal (+) and the ground wire to the car body.

• Do not touch the amplifier with wet hands.

Otherwise you may get an electric shock. Also, do

not touch the amplifier when it is wet.

• For traffic safety and to maintain safe driving

conditions, keep the volume low enough so that

you can still hear normal traffic sound.

• Check the connections of the power supply and

subwoofer if a fuse for the separately sold battery

wire blows. Detect the cause and solve the prob-

lem, then replace the fuse with another one of the

same size and rating.

• To prevent malfunction of the amplifier and sub-

woofer, the protective circuit will cut the power

supply to the amplifier (sound will stop) when an

abnormal condition occurs. In such a case, switch

the power to the system OFF and check the

connection of the power supply and subwoofer.

Detect the cause and solve the problem.

• Contact the dealer if you cannot detect the cause.

• To prevent an electric shock or short-circuit

during connection and installation, be sure to

disconnect the negative (–) terminal of the battery

beforehand.

• Confirm that no parts are behind the panel when

PIONEER ELECTRONICS (USA) INC.

P.O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: (0) 3/570.05.11

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

178-184 Boundary Road, Braeside, Victoria 3195, Australia TEL: (03) 9586-6300

PIONEER ELECTRONICS OF CANADA, INC.

300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: 1-877-283-5901

PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.

Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico, D.F. 11000 TEL: 55-9178-4270

Published by Pioneer Corporation. Copyright © 2004 by Pioneer Corporation. All rights reserved.

Publication de Pioneer Corporation. Copyright © 2004 Pioneer Corporation. Tous droits de reproduction et de traduction réservés.

Printed in U.S.A.

Imprimé aux Etats-Unis

drilling a hole for installation of the amplifier. Be

sure to protect all cables and important equipment

such as fuel lines, brake lines and the electrical

wiring from damage.

• DO NOT allow amplifier to come into contact

with liquids due to, for example, the location

where the amplifier is installed. Electrical shock

could result. Also, amplifier and speaker damage,

smoke, and overheating could result from contact

with liquids. In addition, the amplifier surface and

the surface of any attached speakers could become

hot to the touch and minor burns could result.

<KMINX> <04L00000>

<HRD0242-A> UC

Image 1
Contents After-sales service for Pioneer products Before Using This ProductInformation to User Product registrationSetting the Unit Connecting the Unit Connecting the Speaker Terminals Connecting the Power TerminalSetting the Gain for Synced Amplifier Quick Setup of the GainSpecifications InstallationExample of installation on the floor mat or on the chassis Réglage de l’appareil Avant d’utiliser cet appareilSchéma de raccordement Raccordement de l’appareilRaccordement de la borne d’alimentation Raccordement des bornes des haut-parleursRéglage sommaire du gain Réglage fin du gain Réglage du gain de l’amplificateur associéConnexion des câbles des haut-parleurs Remarque Caractéristiques techniquesConsommation moyenne de courant

D3000SPL specifications

The Pioneer D3000SPL is a high-performance subwoofer designed for car audio enthusiasts seeking deep bass and superior sound quality. This innovative subwoofer delivers powerful low-frequency response that complements any sound system, ensuring an immersive listening experience.

One of the main features of the D3000SPL is its robust construction, which includes a reinforced polypropylene cone designed to withstand high levels of power and avoid distortion. This cone is coupled with a durable, butyl rubber surround that enhances flexibility and ensures a smooth, responsive performance. The speaker’s overall design not only contributes to its durability but also helps in producing clear, impactful bass notes.

Power handling is another impressive characteristic of the D3000SPL. With an RMS power rating of 1500 watts and a peak handling capability of up to 3000 watts, this subwoofer can handle the demands of any audio setup. The high power capacity ensures that bass is reproduced accurately, even at high volume levels, allowing users to experience thunderous lows without compromising on clarity.

The D3000SPL incorporates advanced technology, including a four-layer voice coil that enhances thermal management. This design reduces the risk of overheating, ensuring long-term reliability and performance. Additionally, the subwoofer features a double stack ferrite magnet, which increases the motor strength and allows for more precise cone movement. This results in faster response times and less distortion, making the subwoofer suitable for both music and home theatre applications.

Installing the Pioneer D3000SPL is made easier with its versatile mounting options and standard enclosure compatibility. It is designed to fit into various vehicle sizes and audio setups, providing flexibility for users looking to upgrade their sound systems.

In conclusion, the Pioneer D3000SPL is a powerhouse subwoofer that combines durability, high power handling, and advanced technology. Its innovative features make it an ideal choice for car audio enthusiasts who desire deep, resonant bass and superior sound quality. Whether it's for daily use or customization projects, the D3000SPL promises to deliver outstanding performance and enhance any listening experience.