Pioneer CDX-FM677 Display shows this message, Take action according to the chart below

Page 22

Playing Compact Discs

Display shows this message

Take action according to the chart below.

Check discs and magazine once more.

If it still doesn’t work after checking.

Press the CD player’s Clear button. (See Page 23.)

If it still doesn’t work.

Read “After-sales service for Pioneer products” and request servicing.

	Message	Cause	Treatment
	No MAGAZINE (appears)	Removing the magazine from the CD player	To use this system, load the magazine into
	No MAGAZINE (appears)	during CD play.	the CD player and then turn on the power.
		during CD play.	the CD player and then turn on the power.
	No MAGAZINE (flashes for 5 seconds)	Power was turned on while the magazine	Turn on the power after loading the maga-
	No MAGAZINE (flashes for 5 seconds)	was not loaded in the CD player.	zine into the CD player.
		was not loaded in the CD player.	zine into the CD player.
	READY	The CD player is warming up.	Please wait a few moments.
	Err 11, Err 12, Err 14, Err 17	Dirt or a scratch on the disc stops the laser
	Err 11, Err 12, Err 14, Err 17	beam from being able to focus.	Wipe off the dirt. Exchange the disc if it has
		beam from being able to focus.	Wipe off the dirt. Exchange the disc if it has
	Err 30	Dirt or a scratch on the disc hinders the track	been scratched. (See Page 23.)
	Err 30	number search function.
		number search function.
	Err 11, Err 14	The disc has been inserted upside down.	Confirm that the disc has been inserted right
	Err 11, Err 14	The disc has been inserted upside down.	side down. (See Page 6.)
			side down. (See Page 6.)
	Err 14	An unrecorded compact disc (CD-R), which	When you use a CD-R, load one that has
	Err 14	can be recorded on once is being used.	been recorded on.
		can be recorded on once is being used.	been recorded on.
	Err 44	All tracks are setting track skip.	Replace the disc.
	NO DISC	There is no disc in the magazine.	Load a disc into the magazine. (See Page 6.)
	Err 10, Err 11, Err 12, Err 14, Err 17	Electrical or mechanical system fault.	Turn the car ignition switch off and on
	Err 19, Err 30, Err 50, Err 60, Err 70		again, or press power ON/OFF button on the
	Err A0, Err A1		display unit, and start the CD playing again.

22

Image 22

Contents CDX-FM677 Contents/Table des matières English To establish a safe levelPrecautions After-sales service for Pioneer productsPrecautions Preparing to Use the Remote Controller Unit EnglishLoading Battery 6~7 Using the Compact Discs MagazineInserting discs Changing disc traysExtra magazines Precautions when handling magazinesAttaching the label Loading the magazine To remove the magazineStart the CD player Playing Compact Discs EnglishDisc Number Search Using Track Search/Fast Forward and Reverse Playing Compact DiscsRepeat PausingEach press of button, the mode changes Press button to pause during disc playbackHold down button for more than 2 second Select the desired repeat modeRandom Play Example Disc Repeat SeeProgramming ITS Instant Track Selection13~15 Press button to program the trackITS Play Hold down button for more than 2 secondsErasing the ITS Play 16~19 Disc TitleEntering Title Select characters using the or Side of button Press the or side of but- ton to select the input positionDisplay Switching CD Text Title ScrollDisc Title List Select the disc to be played from the disc list displayMode will be entered, and the fre Setting Player to Play Discs via Radio Page 20~21Seconds. The modulator setting Hold down button for more thanButton Display If it still doesn’t work after checking Take action according to the chart belowDisplay shows this message If it still doesn’t workPressing the Clear Button English DiscsTransportation of multi-CD player Antenna Switching unit Remote Controller unit Specifications EnglishDisplay unit Page Pioneer Corporation Parts for connection Pièces requises pour les raccordementsInstalling the Display Unit/Installation de l’afficheur Enlever de I’afficheurMounting parts/Pièces de fixation Mounting angle Angle de montage Angle switching dial adjustmentPositionnement du sélecteur d’angle de montage Page Page