JVC KWR710 instruction manual Pty

GETTING STARTED

1 2

3

Press and hold MENU. Turn the volume knob then press the knob.

Press MENU to exit.

to

make a selection

(see

the

following

table),

.

·roreturn

to

the previous setting

item or hierarchy,

press~

PTY.

Default:

XX

CLOCKADJ

CLOCK DISP

AUTO: The clock time is automatically set using the Clock Time (CT) data in

FM Radio Broadcast Data System signal. ; OFF: Cancels:

ON: The clock time is shown on the display even when the unit is turned

off. ; OFF: Cancels.

1	Press and hold MENU.
2	Turn the volume knob to select [DEMO], then press the knob.
3	Turn the volume knob to select [DEMO OFF], then press the knob.
4	Press MENU to exit.

BEEP	ON: Activates the keyp,ress tone.; OFF: Deactivates.
SRC SELECT
AM*	ON: Enables AM in source selection.; OFF: Disables.

1 2 3 . 4

Press and hold MENU. Turn the volume knob Turn the volume knob Turn the volume knob

to select [CLOCK], then press the knob.

to select [CLOCK SET], then press the knob. to make the settings, then press the knob.

PANDORA* IHEART* AUX*

ON: Enables PANDORA. in source selection.; OFF: Disables.
··········································	........................................
ON: Enables IHEARTRADIO in source selection.; OFF: Disables.
·····-········--------···········-- ·········-~- ···········---~-- -·· ·-·· ·····---~ ---········-·-···--·-······ ······ ·····-·-···-.--~--··· .. .	... ·············•···············...... ··············---·-··
ON: Enables AUX in source selection. ; OFF: Disables. ; BT ADAPTER: Select
when the KS-BTA100 Bluetooth adapter is connected to the auxiliary input

5 6

Day+ Hour+ Minute Turn the volume knob Turn the volume knob knob.

to select [24H/ l2H], then press the knob.

to select [12 HOUR] or [24 HOUR], then press the ·

			jack(+ 8). The source name will change to BT AUOJO.
f-..........__	_	_	,_ _ ,_~---------·--
F/W UPDATE
SYSTEM

7 · Press MENU to exit.

	F/Wxxxx	YES: Starts upgrading the firmware.; NO: Cancels (upgrading is not
		activated).
		For details on how to update the firmware, see:
		<http://www~jvc.net/cs/car/>.
*	Not displayed when the corresponding source is selected.

4