Panasonic Image storage function A210, A110, Setup help function, Global application

MICRO-IMAGECHECKER ® A210•A110 MultiChecker V2 Series

Excellent maintenance characteristics and global compatibility.

Powerful support for startup and maintenance and designed for worldwide use.

Image storage function (A210, A110)

The A Series can store up to 30 defect images, and with the dedicated software tools you analyze the cause of defects at remote locations using e-mail.

Storing up to 30 pictures* of fault occurrences in its memory, it possible for analyzing error causes and making adjustments. When setting up the equipment, inspection images are stored and can be used when making new adjustments and changes. Moreover, the stored images can be used for testing. Also, using special software, image data and inspection conditions can be stored, and then faults can be analyzed and adjustments made at any location using e-mail. Furthermore, the location of all errors are clearly displayed and illuminated so that they can be seen at a glance.

■Dimensions (unit: mm)

●A110/A210 Controller ANMA212V2/ANMA212 ANMA112V2/ANMA112

74

120

(10)	40	(5.5)	55	4-M3 depth1.5
				)
				8
				(
				104
				)
				9.5
				(

)	The A110 does not have a
5.5	camera B port
(

● Double-speed random camera: C mount	● CS mount camera: CS mount
ANM831	ANM832/ANM832CE/ANM83203

OK NG OKNGNG

Image storage

			30
			images
ENTER		Readjustment and	Can be stored
C	B	re-testing analysis	to hard disk or
		takes place using	e-mailed using
		the stored images.	special software

*A210 = 30 image, A110 = 8 images

31		54.5
	8	46.5
29					29
		10
	19	24.5±0.6 4-M3		31	1/4-20UNC
2-M3(depth 4mm)	13	(depth 2.5mm)			(depth 9mm)
				24.5±0.6
		26±0.6			31
				(3.25)	2.5
			(19)
				(31.3)
	Without mounting bracket		With mounting bracket

						)
31	49.5	8	*1)	(43)		14.7
						(depth
			)
			6.7					10.5±0.2
			depth(				38
14	24.5±0.2			2-M3(depth 7mm)
8		4-M3(depth 2.5mm)					18.15 28±0.2
26±0.2						23±0.2
2-M3(depth 4mm)							32.15	1/4-20UNC
			*1) ANM832: 3000		+80			depth 10mm
					–10
Without mounting bracket			*1) ANM832CE: 2780			+80	With mounting bracket
						–10
					+40
			*1) ANM83203: 300 –10

●Operating key pad

ANM8520￿ 54.4 ANM8520￿CE

46

●Monitor (Panasonic: GPBM910) AUGPBM910 (100 V AC)

The product data created with the MICRO-IMAGECHECKER A series and the image data stored in the controller can be stored on a PC using Windows.

Stored data can be restored to the A series controller.

*However, it is not possible to directly restore type data backed up using Vision Backup-Tool with the previous product (Ver. 1) to V2

(Ver. 2). In this case, use the dedicated data conversion software (freeware) to convert the Ver. 1 type data for V2 use, then transfer it to V2 and perform a backup again. If you require the data conversion software, contact your Matsushita Automation Controls Co. Ltd. representative.

￿: Length of cable

259

Setup help function

Quantitative support for settings that once relied on intuition.

With the setup help function, focusing, brightness adjustment, exposure	Focus adjustment	Aperture adjustment	Binarization adjustment
adjustment, binary level settings, and other adjustments that used to be
performed by the operator's professional experience, these adjustments can now
be performed quantitatively. Equipped with an input monitor and test output

ENTER

A B

C

124.6

18

*A

220 228

V-HOLD BLIGHT CONTRAST

Panasonic

Video Monitor GP-BM

36.5 148 36.5

29 180 50

functions, connections to external equipment are also greatly simplified. Great

savings can be made in debugging and adjustment by the combination of the trap

function, which halts inspection when an error is found, and the image storage

and spreadsheet functions.

Approx. 80 mm, including cable connection

ø11.5 *A: Approximated length of cable for keypad used	Note: Allow 80 mm behind the monitor for wiring
The cable is slightly shorter on keypads with	and heat radiation.
CE marking.	Monitor input/output uses a BNC terminal.

Global application

English-Japanese interchange and CE certification English

Displays for the one controller can be set to either English or Japanese to allow use in a great number of countries around the globe. The controller and high- speed random trigger camera are standard products and are certified with CE markings.

Japanese

Video game	EMC(89/336/EEC)
	EN50081-2:1993
style control
	EN50082-2:1995

●Lens

Mounting screws (locked lens only)

A

B

C Mount lens		A	B
ANB842	f=6.5	φ =48	42
ANB843(L)	f=8.5	φ =42	40
ANB845N(L)	f=16	φ =30	33
ANB846N(L)	f=25	φ =30	37.3
ANB88161	f=16	φ =30.5	25
ANB88251	f=25	φ =30.5	25.5
ANB847(L)	f=50	φ =48	48
ANM8850	f=50	φ =27.5	38.5
ANM88501	f=50	φ =30.5	38.5
CS Mount lens		A	B
ANM8808	f=8	φ =34	35
ANM88081	f=8	φ =31	35
ANM8804	f=4	φ =34	41
ANM88041	f=4	φ =31	40
ANM8828	f=2.8	φ =34	38
ANM88281	f=2.8	φ =31	37.5

●Camera cable ANM84303/ANM84303CE

ANM840 ￿￿A

ANM840 ￿￿ACE

￿: Length of cable

*B

(43)

ø14.7

*B: Approximated length of cable used

The cable is slightly shorter on keypads with CE marking.

8

11/2004

11/2004

9