MP3 source
?Cannot play an MP3.67
✔The disc format is not accepted in the unit connected.
☞Refer to the instruction manual of the disc changer (slave unit) for creation of compatible formats.
✔The MP3 has no or invalid track name extension.68
☞Add the ".MP3" extension to the MP3 track name.
✔The media is scratched or dirty.69
☞Clean the media.
?Noise or no sound generated when an MP3 is played.70
✔The track has the MP3 track name extension while it is not an MP3.
☞Do not use the ".MP3" extension in
?Takes time before the unit starts playing MP3.71
✔The medium contains many discs, tracks, and hierarchical levels.
☞The unit checks all tracks on the loaded medium first. If the medium has many tracks recorded, it may take a long time for the unit before it starts playing MP3.
?Fails to play MP3 in the intended order.72
✔The MP3 tracks were not written by the CD writer in the order in which you wanted them to be played.
☞Depending on the CD writer, you may be able to set the order in which MP3 tracks are to be played by writing them onto a medium with their track names beginning with play sequence numbers such as "01" to "99".
?The sound skips when an MP3 is being played.73-1
✔The media is scratched or dirty.
☞Clean the media.
✔The recording condition is
☞Record the media again or use another media.
?The songs in the selected folder aren’t played in Folder Search mode.77
✔There are no MP3 in the selected folder.
☞Make sure there’s recorded content in the MP3 media.
?The MP3 track search takes time.78
✔Many tracks are recorded on the media.
☞When the media directory is complex, the track search can take time.
— 23 —